42 lines
2.4 KiB
INI
42 lines
2.4 KiB
INI
; ── PlatformIO project configuration ─────────────────────────────────────────
|
|
; Board : Seeed XIAO nRF52840 Sense
|
|
; Core : Adafruit nRF52 Arduino (via Seeed platform-seeedboards)
|
|
; Flash : adafruit-nrfutil over USB serial (same as Arduino IDE)
|
|
;
|
|
; First-time setup:
|
|
; pip install adafruit-nrfutil <- upload tool (once, globally)
|
|
; pio run -t upload <- build + flash
|
|
; ──────────────────────────────────────────────────────────────────────────────
|
|
|
|
[platformio]
|
|
src_dir = source
|
|
|
|
[env:xiao_nrf52840_sense]
|
|
platform = https://github.com/Seeed-Studio/platform-seeedboards.git
|
|
board = seeed-xiao-afruitnrf52-nrf52840
|
|
framework = arduino
|
|
|
|
; ── Upload ────────────────────────────────────────────────────────────────────
|
|
; The XIAO uses a UF2 bootloader that accepts firmware via adafruit-nrfutil.
|
|
; Double-tap the reset button to enter bootloader (red LED pulses) before
|
|
; flashing if the board isn't auto-reset by the tool.
|
|
upload_protocol = nrfutil
|
|
upload_speed = 115200
|
|
; Uncomment and set the correct port if auto-detect fails:
|
|
; upload_port = COM3
|
|
|
|
; ── Build flags ───────────────────────────────────────────────────────────────
|
|
build_flags =
|
|
-DARDUINO_Seeed_XIAO_nRF52840_Sense
|
|
-DNRF52840_XXAA
|
|
|
|
; ── Libraries ─────────────────────────────────────────────────────────────────
|
|
; bluefruit.h, Adafruit_LittleFS.h, InternalFileSystem.h are bundled with
|
|
; the Adafruit nRF52 core and do NOT need to be listed here.
|
|
; Only external libraries are listed:
|
|
lib_deps =
|
|
Seeed-Studio/Seeed Arduino LSM6DS3 @ ^2.0.3
|
|
|
|
; ── Serial monitor ────────────────────────────────────────────────────────────
|
|
monitor_speed = 115200
|