Motion Parameters
Sensitivity
Cursor speed multiplier
600
Dead Zone
Noise floor (rad/s) — raise to reduce drift
0.060
Accel Strength
Pointer acceleration multiplier
0.08
Motion Curve
Scaling Curve
Response shape for input magnitude
Proportional.
Predictable.
Predictable.
Precision at slow,
power at fast.
power at fast.
Coarse fast,
fine near target.
fine near target.
Battery Charging
Charge Mode
BQ25100 ISET via P0.13 (HICHG)
--
Status
--
Current
--%
Level
Axis Configuration
Flip X Axis
Invert left / right
Flip Y Axis
Invert up / down
Device Capabilities
Tap Detection
Double-tap click action · restart to apply
Temp Compensation
Gyro drift correction by temperature
Auto Recalibration
Recalibrate gyro after long idle period
Tap Configuration
Tap Freeze
Freeze cursor during tap impacts (jerk detection)
Tap Freeze Sensitivity
Jerk² threshold — lower = more aggressive cursor freeze during taps
2000
Tap Threshold
Impact force needed · 1 LSB ≈ 62.5 mg at ±2g
750 mg
Double-Tap Action
What a double-tap sends
Physical Buttons
● Left
● Right
● Middle
Left Click
Pin wired to GND when pressed
Right Click
Pin wired to GND when pressed
Middle Click
Pin wired to GND when pressed
Pull-up built-in · wire button between chosen pin and GND
Device Commands
Event Log
Live Cursor Visualiser
IMU Stream
⏸ PAUSED
Dot = cursor position. Trail fades over time. Cyan flash = left click, red flash = right click.
Device Orientation
— not streaming —
Live Telemetry
--
Temperature °C
--
Uptime
0
Left Clicks
0
Right Clicks
--
Bias RMS (rad/s)
0
Recal Count