foož
This commit is contained in:
root committed
1 parent
171300c1e3
commit
f3f2f8cfb5
36 files changed
+355
-1221
No files matched your search
+2
-2
@@ -29,7 +29,7 @@ echo " Verifying main directory..."
|
|||||||
proceed #error check
|
proceed #error check
|
||||||
echo " DONE!"
|
echo " DONE!"
|
||||||
echo " Entering the library directory..."
|
echo " Entering the library directory..."
|
||||||
cd cylib && proceed=1 #cd to the lib dir
|
cd configutility/linux/cylib && proceed=1 #cd to the lib dir
|
||||||
proceed #error check
|
proceed #error check
|
||||||
echo " DONE!"
|
echo " DONE!"
|
||||||
echo " Compiling and installing the library..."
|
echo " Compiling and installing the library..."
|
||||||
@@ -38,7 +38,7 @@ proceed
|
|||||||
echo " DONE!"
|
echo " DONE!"
|
||||||
echo " Library installation complete."
|
echo " Library installation complete."
|
||||||
echo " Going back..."
|
echo " Going back..."
|
||||||
cd .. && proceed=1 #to main dir
|
cd ../../.. && proceed=1 #to main dir
|
||||||
proceed
|
proceed
|
||||||
echo " DONE!"
|
echo " DONE!"
|
||||||
echo " Entering the TinI/O build directory"
|
echo " Entering the TinI/O build directory"
|
||||||
|
|||||||
@@ -1,36 +0,0 @@
|
|||||||
========================================================================================
|
|
||||||
Cypress Semiconductor Corporation
|
|
||||||
CyUSB Serial library.
|
|
||||||
=========================================================================================
|
|
||||||
Pre-requisite:
|
|
||||||
1. libusb-1.0.9 is required for compilation and functioning of the APIs in the library.
|
|
||||||
2. GNU Make and the GCC tool-chain are used for the build process.
|
|
||||||
|
|
||||||
Installation steps:
|
|
||||||
|
|
||||||
1.cd to the main directory where the library source files are extracted and goto ./linux/library
|
|
||||||
|
|
||||||
2.Type 'sudo make'.
|
|
||||||
|
|
||||||
2.This will generate shared library libcyusbserial.so.1 and its soft link libcyusbserial.so.
|
|
||||||
Both of them will be copied/installed to /usr/local/lib.
|
|
||||||
|
|
||||||
3.Go to ./linux/testUtility (I2C/SPI test utility program) and type 'sudo make'.
|
|
||||||
This will generate CyUSBSerialTestUtility binary (Refer to README in testUtility folder).
|
|
||||||
|
|
||||||
4.User can launch the application and test the communication with Cypress USB-Serial DVk in vendor mode.
|
|
||||||
|
|
||||||
Changing USB device node permission:
|
|
||||||
|
|
||||||
By default the USB device node created in linux do not have read/write permission
|
|
||||||
for normal user. In order to make the USB device node accessable, copy 90-cyusb.rules
|
|
||||||
which is inside the library folder of release package to /etc/udev/rules.d folder (Default VID mentioned is Cypress VID
|
|
||||||
which is 0x4B4, if VID is changed then update it in ATTR{idVendor} section of rules file).
|
|
||||||
|
|
||||||
*** IMPORTANT:
|
|
||||||
Some distribution of linux have libusb (older version) as part of their package. Uninstall
|
|
||||||
the older version and update it with libusb-1.0.9.
|
|
||||||
|
|
||||||
**Note:
|
|
||||||
Refer to ./common/doc/CyUSBSerial API documentation.pdf for description of all
|
|
||||||
the vendor mode APIs. The header file of the library is in ./common/header/CyUSBSerial.h.
|
|
||||||
@@ -1,504 +0,0 @@
|
|||||||
GNU LESSER GENERAL PUBLIC LICENSE
|
|
||||||
Version 2.1, February 1999
|
|
||||||
|
|
||||||
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
|
|
||||||
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
||||||
Everyone is permitted to copy and distribute verbatim copies
|
|
||||||
of this license document, but changing it is not allowed.
|
|
||||||
|
|
||||||
[This is the first released version of the Lesser GPL. It also counts
|
|
||||||
as the successor of the GNU Library Public License, version 2, hence
|
|
||||||
the version number 2.1.]
|
|
||||||
|
|
||||||
Preamble
|
|
||||||
|
|
||||||
The licenses for most software are designed to take away your
|
|
||||||
freedom to share and change it. By contrast, the GNU General Public
|
|
||||||
Licenses are intended to guarantee your freedom to share and change
|
|
||||||
free software--to make sure the software is free for all its users.
|
|
||||||
|
|
||||||
This license, the Lesser General Public License, applies to some
|
|
||||||
specially designated software packages--typically libraries--of the
|
|
||||||
Free Software Foundation and other authors who decide to use it. You
|
|
||||||
can use it too, but we suggest you first think carefully about whether
|
|
||||||
this license or the ordinary General Public License is the better
|
|
||||||
strategy to use in any particular case, based on the explanations below.
|
|
||||||
|
|
||||||
When we speak of free software, we are referring to freedom of use,
|
|
||||||
not price. Our General Public Licenses are designed to make sure that
|
|
||||||
you have the freedom to distribute copies of free software (and charge
|
|
||||||
for this service if you wish); that you receive source code or can get
|
|
||||||
it if you want it; that you can change the software and use pieces of
|
|
||||||
it in new free programs; and that you are informed that you can do
|
|
||||||
these things.
|
|
||||||
|
|
||||||
To protect your rights, we need to make restrictions that forbid
|
|
||||||
distributors to deny you these rights or to ask you to surrender these
|
|
||||||
rights. These restrictions translate to certain responsibilities for
|
|
||||||
you if you distribute copies of the library or if you modify it.
|
|
||||||
|
|
||||||
For example, if you distribute copies of the library, whether gratis
|
|
||||||
or for a fee, you must give the recipients all the rights that we gave
|
|
||||||
you. You must make sure that they, too, receive or can get the source
|
|
||||||
code. If you link other code with the library, you must provide
|
|
||||||
complete object files to the recipients, so that they can relink them
|
|
||||||
with the library after making changes to the library and recompiling
|
|
||||||
it. And you must show them these terms so they know their rights.
|
|
||||||
|
|
||||||
We protect your rights with a two-step method: (1) we copyright the
|
|
||||||
library, and (2) we offer you this license, which gives you legal
|
|
||||||
permission to copy, distribute and/or modify the library.
|
|
||||||
|
|
||||||
To protect each distributor, we want to make it very clear that
|
|
||||||
there is no warranty for the free library. Also, if the library is
|
|
||||||
modified by someone else and passed on, the recipients should know
|
|
||||||
that what they have is not the original version, so that the original
|
|
||||||
author's reputation will not be affected by problems that might be
|
|
||||||
introduced by others.
|
|
||||||
|
|
||||||
Finally, software patents pose a constant threat to the existence of
|
|
||||||
any free program. We wish to make sure that a company cannot
|
|
||||||
effectively restrict the users of a free program by obtaining a
|
|
||||||
restrictive license from a patent holder. Therefore, we insist that
|
|
||||||
any patent license obtained for a version of the library must be
|
|
||||||
consistent with the full freedom of use specified in this license.
|
|
||||||
|
|
||||||
Most GNU software, including some libraries, is covered by the
|
|
||||||
ordinary GNU General Public License. This license, the GNU Lesser
|
|
||||||
General Public License, applies to certain designated libraries, and
|
|
||||||
is quite different from the ordinary General Public License. We use
|
|
||||||
this license for certain libraries in order to permit linking those
|
|
||||||
libraries into non-free programs.
|
|
||||||
|
|
||||||
When a program is linked with a library, whether statically or using
|
|
||||||
a shared library, the combination of the two is legally speaking a
|
|
||||||
combined work, a derivative of the original library. The ordinary
|
|
||||||
General Public License therefore permits such linking only if the
|
|
||||||
entire combination fits its criteria of freedom. The Lesser General
|
|
||||||
Public License permits more lax criteria for linking other code with
|
|
||||||
the library.
|
|
||||||
|
|
||||||
We call this license the "Lesser" General Public License because it
|
|
||||||
does Less to protect the user's freedom than the ordinary General
|
|
||||||
Public License. It also provides other free software developers Less
|
|
||||||
of an advantage over competing non-free programs. These disadvantages
|
|
||||||
are the reason we use the ordinary General Public License for many
|
|
||||||
libraries. However, the Lesser license provides advantages in certain
|
|
||||||
special circumstances.
|
|
||||||
|
|
||||||
For example, on rare occasions, there may be a special need to
|
|
||||||
encourage the widest possible use of a certain library, so that it becomes
|
|
||||||
a de-facto standard. To achieve this, non-free programs must be
|
|
||||||
allowed to use the library. A more frequent case is that a free
|
|
||||||
library does the same job as widely used non-free libraries. In this
|
|
||||||
case, there is little to gain by limiting the free library to free
|
|
||||||
software only, so we use the Lesser General Public License.
|
|
||||||
|
|
||||||
In other cases, permission to use a particular library in non-free
|
|
||||||
programs enables a greater number of people to use a large body of
|
|
||||||
free software. For example, permission to use the GNU C Library in
|
|
||||||
non-free programs enables many more people to use the whole GNU
|
|
||||||
operating system, as well as its variant, the GNU/Linux operating
|
|
||||||
system.
|
|
||||||
|
|
||||||
Although the Lesser General Public License is Less protective of the
|
|
||||||
users' freedom, it does ensure that the user of a program that is
|
|
||||||
linked with the Library has the freedom and the wherewithal to run
|
|
||||||
that program using a modified version of the Library.
|
|
||||||
|
|
||||||
The precise terms and conditions for copying, distribution and
|
|
||||||
modification follow. Pay close attention to the difference between a
|
|
||||||
"work based on the library" and a "work that uses the library". The
|
|
||||||
former contains code derived from the library, whereas the latter must
|
|
||||||
be combined with the library in order to run.
|
|
||||||
|
|
||||||
GNU LESSER GENERAL PUBLIC LICENSE
|
|
||||||
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
|
|
||||||
|
|
||||||
0. This License Agreement applies to any software library or other
|
|
||||||
program which contains a notice placed by the copyright holder or
|
|
||||||
other authorized party saying it may be distributed under the terms of
|
|
||||||
this Lesser General Public License (also called "this License").
|
|
||||||
Each licensee is addressed as "you".
|
|
||||||
|
|
||||||
A "library" means a collection of software functions and/or data
|
|
||||||
prepared so as to be conveniently linked with application programs
|
|
||||||
(which use some of those functions and data) to form executables.
|
|
||||||
|
|
||||||
The "Library", below, refers to any such software library or work
|
|
||||||
which has been distributed under these terms. A "work based on the
|
|
||||||
Library" means either the Library or any derivative work under
|
|
||||||
copyright law: that is to say, a work containing the Library or a
|
|
||||||
portion of it, either verbatim or with modifications and/or translated
|
|
||||||
straightforwardly into another language. (Hereinafter, translation is
|
|
||||||
included without limitation in the term "modification".)
|
|
||||||
|
|
||||||
"Source code" for a work means the preferred form of the work for
|
|
||||||
making modifications to it. For a library, complete source code means
|
|
||||||
all the source code for all modules it contains, plus any associated
|
|
||||||
interface definition files, plus the scripts used to control compilation
|
|
||||||
and installation of the library.
|
|
||||||
|
|
||||||
Activities other than copying, distribution and modification are not
|
|
||||||
covered by this License; they are outside its scope. The act of
|
|
||||||
running a program using the Library is not restricted, and output from
|
|
||||||
such a program is covered only if its contents constitute a work based
|
|
||||||
on the Library (independent of the use of the Library in a tool for
|
|
||||||
writing it). Whether that is true depends on what the Library does
|
|
||||||
and what the program that uses the Library does.
|
|
||||||
|
|
||||||
1. You may copy and distribute verbatim copies of the Library's
|
|
||||||
complete source code as you receive it, in any medium, provided that
|
|
||||||
you conspicuously and appropriately publish on each copy an
|
|
||||||
appropriate copyright notice and disclaimer of warranty; keep intact
|
|
||||||
all the notices that refer to this License and to the absence of any
|
|
||||||
warranty; and distribute a copy of this License along with the
|
|
||||||
Library.
|
|
||||||
|
|
||||||
You may charge a fee for the physical act of transferring a copy,
|
|
||||||
and you may at your option offer warranty protection in exchange for a
|
|
||||||
fee.
|
|
||||||
|
|
||||||
2. You may modify your copy or copies of the Library or any portion
|
|
||||||
of it, thus forming a work based on the Library, and copy and
|
|
||||||
distribute such modifications or work under the terms of Section 1
|
|
||||||
above, provided that you also meet all of these conditions:
|
|
||||||
|
|
||||||
a) The modified work must itself be a software library.
|
|
||||||
|
|
||||||
b) You must cause the files modified to carry prominent notices
|
|
||||||
stating that you changed the files and the date of any change.
|
|
||||||
|
|
||||||
c) You must cause the whole of the work to be licensed at no
|
|
||||||
charge to all third parties under the terms of this License.
|
|
||||||
|
|
||||||
d) If a facility in the modified Library refers to a function or a
|
|
||||||
table of data to be supplied by an application program that uses
|
|
||||||
the facility, other than as an argument passed when the facility
|
|
||||||
is invoked, then you must make a good faith effort to ensure that,
|
|
||||||
in the event an application does not supply such function or
|
|
||||||
table, the facility still operates, and performs whatever part of
|
|
||||||
its purpose remains meaningful.
|
|
||||||
|
|
||||||
(For example, a function in a library to compute square roots has
|
|
||||||
a purpose that is entirely well-defined independent of the
|
|
||||||
application. Therefore, Subsection 2d requires that any
|
|
||||||
application-supplied function or table used by this function must
|
|
||||||
be optional: if the application does not supply it, the square
|
|
||||||
root function must still compute square roots.)
|
|
||||||
|
|
||||||
These requirements apply to the modified work as a whole. If
|
|
||||||
identifiable sections of that work are not derived from the Library,
|
|
||||||
and can be reasonably considered independent and separate works in
|
|
||||||
themselves, then this License, and its terms, do not apply to those
|
|
||||||
sections when you distribute them as separate works. But when you
|
|
||||||
distribute the same sections as part of a whole which is a work based
|
|
||||||
on the Library, the distribution of the whole must be on the terms of
|
|
||||||
this License, whose permissions for other licensees extend to the
|
|
||||||
entire whole, and thus to each and every part regardless of who wrote
|
|
||||||
it.
|
|
||||||
|
|
||||||
Thus, it is not the intent of this section to claim rights or contest
|
|
||||||
your rights to work written entirely by you; rather, the intent is to
|
|
||||||
exercise the right to control the distribution of derivative or
|
|
||||||
collective works based on the Library.
|
|
||||||
|
|
||||||
In addition, mere aggregation of another work not based on the Library
|
|
||||||
with the Library (or with a work based on the Library) on a volume of
|
|
||||||
a storage or distribution medium does not bring the other work under
|
|
||||||
the scope of this License.
|
|
||||||
|
|
||||||
3. You may opt to apply the terms of the ordinary GNU General Public
|
|
||||||
License instead of this License to a given copy of the Library. To do
|
|
||||||
this, you must alter all the notices that refer to this License, so
|
|
||||||
that they refer to the ordinary GNU General Public License, version 2,
|
|
||||||
instead of to this License. (If a newer version than version 2 of the
|
|
||||||
ordinary GNU General Public License has appeared, then you can specify
|
|
||||||
that version instead if you wish.) Do not make any other change in
|
|
||||||
these notices.
|
|
||||||
|
|
||||||
Once this change is made in a given copy, it is irreversible for
|
|
||||||
that copy, so the ordinary GNU General Public License applies to all
|
|
||||||
subsequent copies and derivative works made from that copy.
|
|
||||||
|
|
||||||
This option is useful when you wish to copy part of the code of
|
|
||||||
the Library into a program that is not a library.
|
|
||||||
|
|
||||||
4. You may copy and distribute the Library (or a portion or
|
|
||||||
derivative of it, under Section 2) in object code or executable form
|
|
||||||
under the terms of Sections 1 and 2 above provided that you accompany
|
|
||||||
it with the complete corresponding machine-readable source code, which
|
|
||||||
must be distributed under the terms of Sections 1 and 2 above on a
|
|
||||||
medium customarily used for software interchange.
|
|
||||||
|
|
||||||
If distribution of object code is made by offering access to copy
|
|
||||||
from a designated place, then offering equivalent access to copy the
|
|
||||||
source code from the same place satisfies the requirement to
|
|
||||||
distribute the source code, even though third parties are not
|
|
||||||
compelled to copy the source along with the object code.
|
|
||||||
|
|
||||||
5. A program that contains no derivative of any portion of the
|
|
||||||
Library, but is designed to work with the Library by being compiled or
|
|
||||||
linked with it, is called a "work that uses the Library". Such a
|
|
||||||
work, in isolation, is not a derivative work of the Library, and
|
|
||||||
therefore falls outside the scope of this License.
|
|
||||||
|
|
||||||
However, linking a "work that uses the Library" with the Library
|
|
||||||
creates an executable that is a derivative of the Library (because it
|
|
||||||
contains portions of the Library), rather than a "work that uses the
|
|
||||||
library". The executable is therefore covered by this License.
|
|
||||||
Section 6 states terms for distribution of such executables.
|
|
||||||
|
|
||||||
When a "work that uses the Library" uses material from a header file
|
|
||||||
that is part of the Library, the object code for the work may be a
|
|
||||||
derivative work of the Library even though the source code is not.
|
|
||||||
Whether this is true is especially significant if the work can be
|
|
||||||
linked without the Library, or if the work is itself a library. The
|
|
||||||
threshold for this to be true is not precisely defined by law.
|
|
||||||
|
|
||||||
If such an object file uses only numerical parameters, data
|
|
||||||
structure layouts and accessors, and small macros and small inline
|
|
||||||
functions (ten lines or less in length), then the use of the object
|
|
||||||
file is unrestricted, regardless of whether it is legally a derivative
|
|
||||||
work. (Executables containing this object code plus portions of the
|
|
||||||
Library will still fall under Section 6.)
|
|
||||||
|
|
||||||
Otherwise, if the work is a derivative of the Library, you may
|
|
||||||
distribute the object code for the work under the terms of Section 6.
|
|
||||||
Any executables containing that work also fall under Section 6,
|
|
||||||
whether or not they are linked directly with the Library itself.
|
|
||||||
|
|
||||||
6. As an exception to the Sections above, you may also combine or
|
|
||||||
link a "work that uses the Library" with the Library to produce a
|
|
||||||
work containing portions of the Library, and distribute that work
|
|
||||||
under terms of your choice, provided that the terms permit
|
|
||||||
modification of the work for the customer's own use and reverse
|
|
||||||
engineering for debugging such modifications.
|
|
||||||
|
|
||||||
You must give prominent notice with each copy of the work that the
|
|
||||||
Library is used in it and that the Library and its use are covered by
|
|
||||||
this License. You must supply a copy of this License. If the work
|
|
||||||
during execution displays copyright notices, you must include the
|
|
||||||
copyright notice for the Library among them, as well as a reference
|
|
||||||
directing the user to the copy of this License. Also, you must do one
|
|
||||||
of these things:
|
|
||||||
|
|
||||||
a) Accompany the work with the complete corresponding
|
|
||||||
machine-readable source code for the Library including whatever
|
|
||||||
changes were used in the work (which must be distributed under
|
|
||||||
Sections 1 and 2 above); and, if the work is an executable linked
|
|
||||||
with the Library, with the complete machine-readable "work that
|
|
||||||
uses the Library", as object code and/or source code, so that the
|
|
||||||
user can modify the Library and then relink to produce a modified
|
|
||||||
executable containing the modified Library. (It is understood
|
|
||||||
that the user who changes the contents of definitions files in the
|
|
||||||
Library will not necessarily be able to recompile the application
|
|
||||||
to use the modified definitions.)
|
|
||||||
|
|
||||||
b) Use a suitable shared library mechanism for linking with the
|
|
||||||
Library. A suitable mechanism is one that (1) uses at run time a
|
|
||||||
copy of the library already present on the user's computer system,
|
|
||||||
rather than copying library functions into the executable, and (2)
|
|
||||||
will operate properly with a modified version of the library, if
|
|
||||||
the user installs one, as long as the modified version is
|
|
||||||
interface-compatible with the version that the work was made with.
|
|
||||||
|
|
||||||
c) Accompany the work with a written offer, valid for at
|
|
||||||
least three years, to give the same user the materials
|
|
||||||
specified in Subsection 6a, above, for a charge no more
|
|
||||||
than the cost of performing this distribution.
|
|
||||||
|
|
||||||
d) If distribution of the work is made by offering access to copy
|
|
||||||
from a designated place, offer equivalent access to copy the above
|
|
||||||
specified materials from the same place.
|
|
||||||
|
|
||||||
e) Verify that the user has already received a copy of these
|
|
||||||
materials or that you have already sent this user a copy.
|
|
||||||
|
|
||||||
For an executable, the required form of the "work that uses the
|
|
||||||
Library" must include any data and utility programs needed for
|
|
||||||
reproducing the executable from it. However, as a special exception,
|
|
||||||
the materials to be distributed need not include anything that is
|
|
||||||
normally distributed (in either source or binary form) with the major
|
|
||||||
components (compiler, kernel, and so on) of the operating system on
|
|
||||||
which the executable runs, unless that component itself accompanies
|
|
||||||
the executable.
|
|
||||||
|
|
||||||
It may happen that this requirement contradicts the license
|
|
||||||
restrictions of other proprietary libraries that do not normally
|
|
||||||
accompany the operating system. Such a contradiction means you cannot
|
|
||||||
use both them and the Library together in an executable that you
|
|
||||||
distribute.
|
|
||||||
|
|
||||||
7. You may place library facilities that are a work based on the
|
|
||||||
Library side-by-side in a single library together with other library
|
|
||||||
facilities not covered by this License, and distribute such a combined
|
|
||||||
library, provided that the separate distribution of the work based on
|
|
||||||
the Library and of the other library facilities is otherwise
|
|
||||||
permitted, and provided that you do these two things:
|
|
||||||
|
|
||||||
a) Accompany the combined library with a copy of the same work
|
|
||||||
based on the Library, uncombined with any other library
|
|
||||||
facilities. This must be distributed under the terms of the
|
|
||||||
Sections above.
|
|
||||||
|
|
||||||
b) Give prominent notice with the combined library of the fact
|
|
||||||
that part of it is a work based on the Library, and explaining
|
|
||||||
where to find the accompanying uncombined form of the same work.
|
|
||||||
|
|
||||||
8. You may not copy, modify, sublicense, link with, or distribute
|
|
||||||
the Library except as expressly provided under this License. Any
|
|
||||||
attempt otherwise to copy, modify, sublicense, link with, or
|
|
||||||
distribute the Library is void, and will automatically terminate your
|
|
||||||
rights under this License. However, parties who have received copies,
|
|
||||||
or rights, from you under this License will not have their licenses
|
|
||||||
terminated so long as such parties remain in full compliance.
|
|
||||||
|
|
||||||
9. You are not required to accept this License, since you have not
|
|
||||||
signed it. However, nothing else grants you permission to modify or
|
|
||||||
distribute the Library or its derivative works. These actions are
|
|
||||||
prohibited by law if you do not accept this License. Therefore, by
|
|
||||||
modifying or distributing the Library (or any work based on the
|
|
||||||
Library), you indicate your acceptance of this License to do so, and
|
|
||||||
all its terms and conditions for copying, distributing or modifying
|
|
||||||
the Library or works based on it.
|
|
||||||
|
|
||||||
10. Each time you redistribute the Library (or any work based on the
|
|
||||||
Library), the recipient automatically receives a license from the
|
|
||||||
original licensor to copy, distribute, link with or modify the Library
|
|
||||||
subject to these terms and conditions. You may not impose any further
|
|
||||||
restrictions on the recipients' exercise of the rights granted herein.
|
|
||||||
You are not responsible for enforcing compliance by third parties with
|
|
||||||
this License.
|
|
||||||
|
|
||||||
11. If, as a consequence of a court judgment or allegation of patent
|
|
||||||
infringement or for any other reason (not limited to patent issues),
|
|
||||||
conditions are imposed on you (whether by court order, agreement or
|
|
||||||
otherwise) that contradict the conditions of this License, they do not
|
|
||||||
excuse you from the conditions of this License. If you cannot
|
|
||||||
distribute so as to satisfy simultaneously your obligations under this
|
|
||||||
License and any other pertinent obligations, then as a consequence you
|
|
||||||
may not distribute the Library at all. For example, if a patent
|
|
||||||
license would not permit royalty-free redistribution of the Library by
|
|
||||||
all those who receive copies directly or indirectly through you, then
|
|
||||||
the only way you could satisfy both it and this License would be to
|
|
||||||
refrain entirely from distribution of the Library.
|
|
||||||
|
|
||||||
If any portion of this section is held invalid or unenforceable under any
|
|
||||||
particular circumstance, the balance of the section is intended to apply,
|
|
||||||
and the section as a whole is intended to apply in other circumstances.
|
|
||||||
|
|
||||||
It is not the purpose of this section to induce you to infringe any
|
|
||||||
patents or other property right claims or to contest validity of any
|
|
||||||
such claims; this section has the sole purpose of protecting the
|
|
||||||
integrity of the free software distribution system which is
|
|
||||||
implemented by public license practices. Many people have made
|
|
||||||
generous contributions to the wide range of software distributed
|
|
||||||
through that system in reliance on consistent application of that
|
|
||||||
system; it is up to the author/donor to decide if he or she is willing
|
|
||||||
to distribute software through any other system and a licensee cannot
|
|
||||||
impose that choice.
|
|
||||||
|
|
||||||
This section is intended to make thoroughly clear what is believed to
|
|
||||||
be a consequence of the rest of this License.
|
|
||||||
|
|
||||||
12. If the distribution and/or use of the Library is restricted in
|
|
||||||
certain countries either by patents or by copyrighted interfaces, the
|
|
||||||
original copyright holder who places the Library under this License may add
|
|
||||||
an explicit geographical distribution limitation excluding those countries,
|
|
||||||
so that distribution is permitted only in or among countries not thus
|
|
||||||
excluded. In such case, this License incorporates the limitation as if
|
|
||||||
written in the body of this License.
|
|
||||||
|
|
||||||
13. The Free Software Foundation may publish revised and/or new
|
|
||||||
versions of the Lesser General Public License from time to time.
|
|
||||||
Such new versions will be similar in spirit to the present version,
|
|
||||||
but may differ in detail to address new problems or concerns.
|
|
||||||
|
|
||||||
Each version is given a distinguishing version number. If the Library
|
|
||||||
specifies a version number of this License which applies to it and
|
|
||||||
"any later version", you have the option of following the terms and
|
|
||||||
conditions either of that version or of any later version published by
|
|
||||||
the Free Software Foundation. If the Library does not specify a
|
|
||||||
license version number, you may choose any version ever published by
|
|
||||||
the Free Software Foundation.
|
|
||||||
|
|
||||||
14. If you wish to incorporate parts of the Library into other free
|
|
||||||
programs whose distribution conditions are incompatible with these,
|
|
||||||
write to the author to ask for permission. For software which is
|
|
||||||
copyrighted by the Free Software Foundation, write to the Free
|
|
||||||
Software Foundation; we sometimes make exceptions for this. Our
|
|
||||||
decision will be guided by the two goals of preserving the free status
|
|
||||||
of all derivatives of our free software and of promoting the sharing
|
|
||||||
and reuse of software generally.
|
|
||||||
|
|
||||||
NO WARRANTY
|
|
||||||
|
|
||||||
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
|
|
||||||
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
|
|
||||||
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
|
|
||||||
OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
|
|
||||||
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
|
|
||||||
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
||||||
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
|
|
||||||
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
|
|
||||||
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
|
|
||||||
|
|
||||||
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
|
|
||||||
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
|
|
||||||
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
|
|
||||||
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
|
|
||||||
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
|
|
||||||
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
|
|
||||||
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
|
|
||||||
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
|
|
||||||
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
|
|
||||||
DAMAGES.
|
|
||||||
|
|
||||||
END OF TERMS AND CONDITIONS
|
|
||||||
|
|
||||||
How to Apply These Terms to Your New Libraries
|
|
||||||
|
|
||||||
If you develop a new library, and you want it to be of the greatest
|
|
||||||
possible use to the public, we recommend making it free software that
|
|
||||||
everyone can redistribute and change. You can do so by permitting
|
|
||||||
redistribution under these terms (or, alternatively, under the terms of the
|
|
||||||
ordinary General Public License).
|
|
||||||
|
|
||||||
To apply these terms, attach the following notices to the library. It is
|
|
||||||
safest to attach them to the start of each source file to most effectively
|
|
||||||
convey the exclusion of warranty; and each file should have at least the
|
|
||||||
"copyright" line and a pointer to where the full notice is found.
|
|
||||||
|
|
||||||
<one line to give the library's name and a brief idea of what it does.>
|
|
||||||
Copyright (C) <year> <name of author>
|
|
||||||
|
|
||||||
This library is free software; you can redistribute it and/or
|
|
||||||
modify it under the terms of the GNU Lesser General Public
|
|
||||||
License as published by the Free Software Foundation; either
|
|
||||||
version 2.1 of the License, or (at your option) any later version.
|
|
||||||
|
|
||||||
This library is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
||||||
Lesser General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU Lesser General Public
|
|
||||||
License along with this library; if not, write to the Free Software
|
|
||||||
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
||||||
|
|
||||||
Also add information on how to contact you by electronic and paper mail.
|
|
||||||
|
|
||||||
You should also get your employer (if you work as a programmer) or your
|
|
||||||
school, if any, to sign a "copyright disclaimer" for the library, if
|
|
||||||
necessary. Here is a sample; alter the names:
|
|
||||||
|
|
||||||
Yoyodyne, Inc., hereby disclaims all copyright interest in the
|
|
||||||
library `Frob' (a library for tweaking knobs) written by James Random Hacker.
|
|
||||||
|
|
||||||
<signature of Ty Coon>, 1 April 1990
|
|
||||||
Ty Coon, President of Vice
|
|
||||||
|
|
||||||
That's all there is to it!
|
|
||||||
|
|
||||||
|
|
||||||
Binary file not shown.
+110
-249
@@ -13,7 +13,7 @@ Using TinI/O is free (as beer _and_ speech), because it's licensed under GNU Gen
|
|||||||
To start using TinI/O, make sure you have:
|
To start using TinI/O, make sure you have:
|
||||||
- A computer running some sort of Linux that has:
|
- A computer running some sort of Linux that has:
|
||||||
+ A free USB port to use the board with
|
+ A free USB port to use the board with
|
||||||
+ installed libusb
|
+ libusb 1.0 and its headers installed
|
||||||
+ 16 MB of free space (or 8 for the bare minimum)
|
+ 16 MB of free space (or 8 for the bare minimum)
|
||||||
+ A C and C++ compiler (preferably gcc and g++)
|
+ A C and C++ compiler (preferably gcc and g++)
|
||||||
|
|
||||||
@@ -23,255 +23,10 @@ To start using TinI/O, make sure you have:
|
|||||||
They can be obtained from Cypress, the manufacturer of the chip. The board I personally use and recommend is the [CY8CKIT-049-4xxx PSoC4 prototyping kit](http://www.cypress.com/documentation/development-kitsboards/psoc-4-cy8ckit-049-4xxx-prototyping-kits), but there are more of them out there, for example, the [CYUSBS234 USB-Serial (Single Channel) Development Kit](http://www.cypress.com/documentation/development-kitsboards/cyusbs234-usb-serial-single-channel-development-kit).
|
They can be obtained from Cypress, the manufacturer of the chip. The board I personally use and recommend is the [CY8CKIT-049-4xxx PSoC4 prototyping kit](http://www.cypress.com/documentation/development-kitsboards/psoc-4-cy8ckit-049-4xxx-prototyping-kits), but there are more of them out there, for example, the [CYUSBS234 USB-Serial (Single Channel) Development Kit](http://www.cypress.com/documentation/development-kitsboards/cyusbs234-usb-serial-single-channel-development-kit).
|
||||||
|
|
||||||
# Building and installing TinI/O
|
# Building and installing TinI/O
|
||||||
|
Installing TinI/O is very easy - just `cd` inside the `tinio` directory and run `make`. When the installation completes, run `make install`. With everything installed, proceed to the next chapter.
|
||||||
## The easy way
|
|
||||||
After you make sure that your computer complies with the system requirements (it probably does), you need to build and install TinI/O. The simplest way to do that is to run the `autobuilder` script in the project root (aka the folder you downloaded TinI/O source to) __as root__. The script will then start the build process and redirect any text from its underlying programs to the standard output. The output should look like this:
|
|
||||||
|
|
||||||
```
|
|
||||||
# ./autobuilder
|
|
||||||
--------------------------
|
|
||||||
Autobuilder for TinI/O 0.1
|
|
||||||
--------------------------
|
|
||||||
Verifying main directory...
|
|
||||||
DONE!
|
|
||||||
Entering the library directory...
|
|
||||||
DONE!
|
|
||||||
Compiling and installing the library...
|
|
||||||
gcc -fPIC -g -Wall -o libcyusb.o -c cyusb.c -I ../../common/header
|
|
||||||
cyusb.c: In function ‘CyOpen’:
|
|
||||||
cyusb.c:556:1: warning: ‘rStatus’ may be used uninitialized in this function [-Wmaybe-uninitialized]
|
|
||||||
printf("rstatus6 %d", rStatus);
|
|
||||||
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
||||||
gcc -fPIC -g -Wall -o libcyuart.o -c cyuart.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyi2c.o -c cyi2c.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyspi.o -c cyspi.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyphdc.o -c cyphdc.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyjtag.o -c cyjtag.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcymisc.o -c cymisc.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyboot.o -c cyboot.c -I ../../common/header
|
|
||||||
cyboot.c:72:0: warning: "CY_USB_SERIAL_TIMEOUT" redefined
|
|
||||||
#define CY_USB_SERIAL_TIMEOUT 0
|
|
||||||
|
|
||||||
In file included from cyboot.c:1:0:
|
|
||||||
CyUSBCommon.h:74:0: note: this is the location of the previous definition
|
|
||||||
#define CY_USB_SERIAL_TIMEOUT 5000
|
|
||||||
|
|
||||||
cyboot.c: In function ‘CyFlashConfigEnable’:
|
|
||||||
cyboot.c:634:21: warning: unused variable ‘ioTimeout’ [-Wunused-variable]
|
|
||||||
UINT32 rStatus, ioTimeout = CY_USB_SERIAL_TIMEOUT;
|
|
||||||
^~~~~~~~~
|
|
||||||
gcc -shared -g -Wl,-soname,libcyusbserial.so -o libcyusbserial.so.1 libcyusb.o libcyuart.o libcyi2c.o libcyspi.o libcyphdc.o libcyjtag.o libcymisc.o libcyboot.o -l usb-1.0
|
|
||||||
cp libcyusbserial.so.1 /usr/local/lib
|
|
||||||
ln -sf /usr/local/lib/libcyusbserial.so.1 /usr/local/lib/libcyusbserial.so
|
|
||||||
ldconfig
|
|
||||||
rm -f libcyusb.o libcyuart.o libcyspi.o libcyi2c.o libcyphdc.o libcyjtag.o libcymisc.o libcyboot.o
|
|
||||||
DONE!
|
|
||||||
Library installation complete.
|
|
||||||
Going back...
|
|
||||||
DONE!
|
|
||||||
Entering the TinI/O build directory
|
|
||||||
DONE!
|
|
||||||
Compiling TinI/O
|
|
||||||
echo "Building tinio..."
|
|
||||||
Building tinio...
|
|
||||||
g++ -lcyusbserial tinio.cpp -o tinio
|
|
||||||
echo "done."
|
|
||||||
done.
|
|
||||||
echo "Installing tinio..."
|
|
||||||
Installing tinio...
|
|
||||||
cp tinio /usr/bin
|
|
||||||
echo "done."
|
|
||||||
done.
|
|
||||||
DONE!
|
|
||||||
Compiling the flasher tool
|
|
||||||
# gcc -g -o CyUSBSerialTestUtility Test_Utility.c -lcyusbserial -w
|
|
||||||
gcc -g -o CyUSBSerialCommandUtility Command_Utility.c -lcyusbserial
|
|
||||||
Command_Utility.c: In function ‘deviceHotPlug’:
|
|
||||||
Command_Utility.c:102:35: warning: passing argument 1 of ‘CyGetListofDevices’ from incompatible pointer type [-Wincompatible-pointer-types]
|
|
||||||
rStatus = CyGetListofDevices (&numDevices);
|
|
||||||
^
|
|
||||||
In file included from Command_Utility.c:33:0:
|
|
||||||
../../common/header/CyUSBSerial.h:705:30: note: expected ‘UINT8 * {aka unsigned char *}’ but argument is of type ‘int *’
|
|
||||||
CYWINEXPORT CY_RETURN_STATUS CyGetListofDevices (
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:105:16: warning: ‘return’ with a value, in function returning void
|
|
||||||
return rStatus;
|
|
||||||
^~~~~~~
|
|
||||||
Command_Utility.c:95:6: note: declared here
|
|
||||||
void deviceHotPlug () {
|
|
||||||
^~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:107:5: warning: implicit declaration of function ‘printListOfDevices’ [-Wimplicit-function-declaration]
|
|
||||||
printListOfDevices (false);
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c: In function ‘main’:
|
|
||||||
Command_Utility.c:139:35: warning: passing argument 1 of ‘CyGetListofDevices’ from incompatible pointer type [-Wincompatible-pointer-types]
|
|
||||||
rStatus = CyGetListofDevices (&numDevices);
|
|
||||||
^
|
|
||||||
In file included from Command_Utility.c:33:0:
|
|
||||||
../../common/header/CyUSBSerial.h:705:30: note: expected ‘UINT8 * {aka unsigned char *}’ but argument is of type ‘int *’
|
|
||||||
CYWINEXPORT CY_RETURN_STATUS CyGetListofDevices (
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:268:51: warning: passing argument 2 of ‘CyReadDeviceConfig’ from incompatible pointer type [-Wincompatible-pointer-types]
|
|
||||||
rStatus=CyReadDeviceConfig(handle,&read_buffer);
|
|
||||||
^
|
|
||||||
In file included from Command_Utility.c:34:0:
|
|
||||||
../../common/header/CyUSBBootloader.h:203:45: note: expected ‘UCHAR * {aka unsigned char *}’ but argument is of type ‘unsigned char (*)[512]’
|
|
||||||
CYWINEXPORT CY_RETURN_STATUS WINCALLCONVEN CyReadDeviceConfig (
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c: At top level:
|
|
||||||
Command_Utility.c:382:6: warning: conflicting types for ‘printListOfDevices’
|
|
||||||
void printListOfDevices (bool isPrint)
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:107:5: note: previous implicit declaration of ‘printListOfDevices’ was here
|
|
||||||
printListOfDevices (false);
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c: In function ‘printListOfDevices’:
|
|
||||||
Command_Utility.c:396:25: warning: passing argument 1 of ‘CyGetListofDevices’ from incompatible pointer type [-Wincompatible-pointer-types]
|
|
||||||
CyGetListofDevices (&numDevices);
|
|
||||||
^
|
|
||||||
In file included from Command_Utility.c:33:0:
|
|
||||||
../../common/header/CyUSBSerial.h:705:30: note: expected ‘UINT8 * {aka unsigned char *}’ but argument is of type ‘int *’
|
|
||||||
CYWINEXPORT CY_RETURN_STATUS CyGetListofDevices (
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:445:75: warning: backslash and newline separated by space
|
|
||||||
printf ("%d |%x |%x | %d | %s\n", \
|
|
||||||
|
|
||||||
cp 90-cyusb.rules /etc/udev/rules.d
|
|
||||||
cp CyUSBSerialCommandUtility /usr/bin/cy-config
|
|
||||||
cp CyUSBSerial.sh /usr/bin
|
|
||||||
chmod 777 /usr/bin/CyUSBSerial.sh
|
|
||||||
DONE!
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
The TinI/O installation is completed.
|
|
||||||
|
|
||||||
```
|
|
||||||
|
|
||||||
If a part of the installation process fails, the script will abort the installation and print out: `Error! The last action autobuild tried to perform failed.` In such case, try also the manual installation described below. If your installation completes succesfully, proceed to the next chapter.
|
|
||||||
|
|
||||||
## The hard way
|
|
||||||
|
|
||||||
In case the automated installation fails, or if you specifically want to build TinI/O manually, you can build TinI/O, the library for it, the flasher tool and the flash files with Makefiles. The order of installation is important: the library must be built first, because TinI/O and the flasher depend on it.
|
|
||||||
|
|
||||||
To build the library, go to the `cylib` directory and run `make`. The output will contain some warnings, which should be ignored. The output should look like this:
|
|
||||||
```
|
|
||||||
make
|
|
||||||
gcc -fPIC -g -Wall -o libcyusb.o -c cyusb.c -I ../../common/header
|
|
||||||
cyusb.c: In function ‘CyOpen’:
|
|
||||||
cyusb.c:556:1: warning: ‘rStatus’ may be used uninitialized in this function [-Wmaybe-uninitialized]
|
|
||||||
printf("rstatus6 %d", rStatus);
|
|
||||||
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
||||||
gcc -fPIC -g -Wall -o libcyuart.o -c cyuart.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyi2c.o -c cyi2c.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyspi.o -c cyspi.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyphdc.o -c cyphdc.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyjtag.o -c cyjtag.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcymisc.o -c cymisc.c -I ../../common/header
|
|
||||||
gcc -fPIC -g -Wall -o libcyboot.o -c cyboot.c -I ../../common/header
|
|
||||||
cyboot.c:72:0: warning: "CY_USB_SERIAL_TIMEOUT" redefined
|
|
||||||
#define CY_USB_SERIAL_TIMEOUT 0
|
|
||||||
|
|
||||||
In file included from cyboot.c:1:0:
|
|
||||||
CyUSBCommon.h:74:0: note: this is the location of the previous definition
|
|
||||||
#define CY_USB_SERIAL_TIMEOUT 5000
|
|
||||||
|
|
||||||
cyboot.c: In function ‘CyFlashConfigEnable’:
|
|
||||||
cyboot.c:634:21: warning: unused variable ‘ioTimeout’ [-Wunused-variable]
|
|
||||||
UINT32 rStatus, ioTimeout = CY_USB_SERIAL_TIMEOUT;
|
|
||||||
^~~~~~~~~
|
|
||||||
gcc -shared -g -Wl,-soname,libcyusbserial.so -o libcyusbserial.so.1 libcyusb.o libcyuart.o libcyi2c.o libcyspi.o libcyphdc.o libcyjtag.o libcymisc.o libcyboot.o -l usb-1.0
|
|
||||||
cp libcyusbserial.so.1 /usr/local/lib
|
|
||||||
ln -sf /usr/local/lib/libcyusbserial.so.1 /usr/local/lib/libcyusbserial.so
|
|
||||||
ldconfig
|
|
||||||
rm -f libcyusb.o libcyuart.o libcyspi.o libcyi2c.o libcyphdc.o libcyjtag.o libcymisc.o libcyboot.o
|
|
||||||
```
|
|
||||||
|
|
||||||
If the library builds succesfully, build the flasher tool next by going into the `tool` directory in the project root and running `make`. Again, the output will contain some warnings and notes that are tobe ignored.
|
|
||||||
The output should look like this:
|
|
||||||
|
|
||||||
```
|
|
||||||
make
|
|
||||||
# gcc -g -o CyUSBSerialTestUtility Test_Utility.c -lcyusbserial -w
|
|
||||||
gcc -g -o CyUSBSerialCommandUtility Command_Utility.c -lcyusbserial
|
|
||||||
Command_Utility.c: In function ‘deviceHotPlug’:
|
|
||||||
Command_Utility.c:102:35: warning: passing argument 1 of ‘CyGetListofDevices’ from incompatible pointer type [-Wincompatible-pointer-types]
|
|
||||||
rStatus = CyGetListofDevices (&numDevices);
|
|
||||||
^
|
|
||||||
In file included from Command_Utility.c:33:0:
|
|
||||||
../../common/header/CyUSBSerial.h:705:30: note: expected ‘UINT8 * {aka unsigned char *}’ but argument is of type ‘int *’
|
|
||||||
CYWINEXPORT CY_RETURN_STATUS CyGetListofDevices (
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:105:16: warning: ‘return’ with a value, in function returning void
|
|
||||||
return rStatus;
|
|
||||||
^~~~~~~
|
|
||||||
Command_Utility.c:95:6: note: declared here
|
|
||||||
void deviceHotPlug () {
|
|
||||||
^~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:107:5: warning: implicit declaration of function ‘printListOfDevices’ [-Wimplicit-function-declaration]
|
|
||||||
printListOfDevices (false);
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c: In function ‘main’:
|
|
||||||
Command_Utility.c:139:35: warning: passing argument 1 of ‘CyGetListofDevices’ from incompatible pointer type [-Wincompatible-pointer-types]
|
|
||||||
rStatus = CyGetListofDevices (&numDevices);
|
|
||||||
^
|
|
||||||
In file included from Command_Utility.c:33:0:
|
|
||||||
../../common/header/CyUSBSerial.h:705:30: note: expected ‘UINT8 * {aka unsigned char *}’ but argument is of type ‘int *’
|
|
||||||
CYWINEXPORT CY_RETURN_STATUS CyGetListofDevices (
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:268:51: warning: passing argument 2 of ‘CyReadDeviceConfig’ from incompatible pointer type [-Wincompatible-pointer-types]
|
|
||||||
rStatus=CyReadDeviceConfig(handle,&read_buffer);
|
|
||||||
^
|
|
||||||
In file included from Command_Utility.c:34:0:
|
|
||||||
../../common/header/CyUSBBootloader.h:203:45: note: expected ‘UCHAR * {aka unsigned char *}’ but argument is of type ‘unsigned char (*)[512]’
|
|
||||||
CYWINEXPORT CY_RETURN_STATUS WINCALLCONVEN CyReadDeviceConfig (
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c: At top level:
|
|
||||||
Command_Utility.c:382:6: warning: conflicting types for ‘printListOfDevices’
|
|
||||||
void printListOfDevices (bool isPrint)
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:107:5: note: previous implicit declaration of ‘printListOfDevices’ was here
|
|
||||||
printListOfDevices (false);
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c: In function ‘printListOfDevices’:
|
|
||||||
Command_Utility.c:396:25: warning: passing argument 1 of ‘CyGetListofDevices’ from incompatible pointer type [-Wincompatible-pointer-types]
|
|
||||||
CyGetListofDevices (&numDevices);
|
|
||||||
^
|
|
||||||
In file included from Command_Utility.c:33:0:
|
|
||||||
../../common/header/CyUSBSerial.h:705:30: note: expected ‘UINT8 * {aka unsigned char *}’ but argument is of type ‘int *’
|
|
||||||
CYWINEXPORT CY_RETURN_STATUS CyGetListofDevices (
|
|
||||||
^~~~~~~~~~~~~~~~~~
|
|
||||||
Command_Utility.c:445:75: warning: backslash and newline separated by space
|
|
||||||
printf ("%d |%x |%x | %d | %s\n", \
|
|
||||||
|
|
||||||
cp 90-cyusb.rules /etc/udev/rules.d
|
|
||||||
cp CyUSBSerialCommandUtility /usr/bin/cy-config
|
|
||||||
cp CyUSBSerial.sh /usr/bin
|
|
||||||
chmod 777 /usr/bin/CyUSBSerial.sh
|
|
||||||
```
|
|
||||||
|
|
||||||
After the succesful installation of the flasher tool, install TinI/O by going into the `tinio` directory in the project root and running `make && make install`. The output should look like this:
|
|
||||||
|
|
||||||
```
|
|
||||||
make && make install
|
|
||||||
echo "Building tinio..."
|
|
||||||
Building tinio...
|
|
||||||
g++ -lcyusbserial tinio.cpp -o tinio
|
|
||||||
echo "done."
|
|
||||||
done.
|
|
||||||
echo "Installing tinio..."
|
|
||||||
Installing tinio...
|
|
||||||
mkdir -p /usr/share/tinio
|
|
||||||
cp -r flash /usr/share/tinio
|
|
||||||
cp tinio /usr/bin
|
|
||||||
echo "done."
|
|
||||||
done.
|
|
||||||
```
|
|
||||||
|
|
||||||
If TinI/O installs succesfully, the installation is completed. Proceed to the next chapter.
|
|
||||||
|
|
||||||
# Flashing the board
|
# Flashing the board
|
||||||
Before you use your board with TinI/O, you must program its chip with a custom flash that will make the board compatible with TinI/O. The flash files are located in the `/usr/share/tinio/flash` directory and can be flashed to the board with the installed `cy-config` utility. There are 2 flash files with slightly different pin configurations: `5-5.cyusbd` and `3-3cs.cyusbd`. The 5-5 file sets half (5) of the GPIO pins as outputs and the other half as inputs. The 3-3cs sets 3 of the pins as outputs and 4 as inputs and 1 pin as a CapSense capacitive touch button and 1 as its output. See the table for the exact pin configuration:
|
Before you use your board with TinI/O, you must program its chip with a custom flash file that will make the board compatible with TinI/O. The flash files are located in the `/usr/share/tinio/flash` directory and can be flashed to the board with the installed `cy-config` utility. There are 2 flash files with slightly different pin configurations: `5-5.cyusbd` and `3-3cs.cyusbd`. The 5-5 file sets half (5) of the GPIO pins as outputs and the other half as inputs. The 3-3cs sets 3 of the pins as outputs and 4 as inputs and 1 pin as a CapSense capacitive touch button and 1 as its output. See the table for the exact pin configuration:
|
||||||
|
|
||||||
| GPIO Pin | 5-5 config | 3-3cs config |
|
| GPIO Pin | 5-5 config | 3-3cs config |
|
||||||
| --- | --- | --- |
|
| --- | --- | --- |
|
||||||
@@ -288,4 +43,110 @@ Before you use your board with TinI/O, you must program its chip with a custom f
|
|||||||
| 10 | Output | Output |
|
| 10 | Output | Output |
|
||||||
| 11 | Output | Input |
|
| 11 | Output | Input |
|
||||||
|
|
||||||
To flash a configuration file
|
After you've decided which configuration you'll use, run the configuration utility with the path of the flash file as an argument , e.g.:`cy-config /usr/share/tinio/flash/5-5.cyusbd`.
|
||||||
|
A menu will appear:
|
||||||
|
```
|
||||||
|
|
||||||
|
---------------------------------------------------------------------------------
|
||||||
|
Device Number | VID | PID | INTERFACE NUMBER | FUNCTIONALITY
|
||||||
|
---------------------------------------------------------------------------------
|
||||||
|
0 |1d6b |2 | 0 | NA
|
||||||
|
1 |413c |3016 | 0 | NA
|
||||||
|
2 |461 |10 | 0 | NA
|
||||||
|
2 |461 |10 | 1 | NA
|
||||||
|
3 |1d6b |1 | 0 | NA
|
||||||
|
4 |8bb |2902 | 0 | NA
|
||||||
|
4 |8bb |2902 | 1 | NA
|
||||||
|
4 |8bb |2902 | 2 | NA
|
||||||
|
4 |8bb |2902 | 3 | NA
|
||||||
|
5 |4b4 |4 | 0 | NA
|
||||||
|
5 |4b4 |4 | 1 | NA
|
||||||
|
6 |1d6b |1 | 0 | NA
|
||||||
|
7 |1d6b |1 | 0 | NA
|
||||||
|
8 |1d6b |2 | 0 | NA
|
||||||
|
9 |1d6b |1 | 0 | NA
|
||||||
|
10 |1d6b |1 | 0 | NA
|
||||||
|
---------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
Cydevices 11-------------------------------------------------------------------
|
||||||
|
1: Print list of devices
|
||||||
|
2: Select device...No device selected !!
|
||||||
|
```
|
||||||
|
At this point, you want to look for the device `4b4` in the VID column. Find its device number. In the example above, the device we're looking for has the device number 5. Select the `Select Device` option in the menu by entering `2`.
|
||||||
|
```
|
||||||
|
2
|
||||||
|
Enter Device number to be selected..
|
||||||
|
```
|
||||||
|
Enter the device number you remembered in the previous step.
|
||||||
|
```
|
||||||
|
5
|
||||||
|
Enter interface number..
|
||||||
|
```
|
||||||
|
Enter __the device's highest interface number in the table__. In the example it's 1, but it can also be 2.
|
||||||
|
|
||||||
|
```
|
||||||
|
1
|
||||||
|
|
||||||
|
File opened successfully
|
||||||
|
|
||||||
|
Bytes successfully read
|
||||||
|
Programming Flash is done
|
||||||
|
File stream closed
|
||||||
|
-------------------------------------------------------------------
|
||||||
|
1: Print list of devices
|
||||||
|
2: Change device selection--selected device: [Device number 5] : [Interface No 1] : NA
|
||||||
|
^C
|
||||||
|
```
|
||||||
|
This is how a successful flashing output should look like. If it doesn't:
|
||||||
|
+ If it gives you a fopen() error, the file you tried to flash doesn't exist or (rarely happens, but still) has a too long path. Find the file or move it to a less obscure folder.
|
||||||
|
+ Make sure you used a right device and file
|
||||||
|
+ Try running the utility as root
|
||||||
|
|
||||||
|
## Creating your own configs
|
||||||
|
If you want to program your device your own way, you can do it with Cypress' [USB-Serial Configuration Utility](http://www.cypress.com/documentation/software-and-drivers/usb-serial-software-development-kit). However, you must follow some guidelines to make your configuration TinI/O compatible.
|
||||||
|
|
||||||
|
The device must be configured to:
|
||||||
|
+ PHDC Interface
|
||||||
|
+ UID and VID left default
|
||||||
|
+ SCB: UART 2-pin
|
||||||
|
|
||||||
|
# Using TinI/O
|
||||||
|
TinI/O is pretty simple to use. To see a quick usage reminder, run `tinio` in the terminal, but here's a more extensive
|
||||||
|
## Usage
|
||||||
|
|
||||||
|
| __Option__ | __Action__ |
|
||||||
|
|------------|------------|
|
||||||
|
| -d<num> | Sets the device number. 0 if left out. Up to 15 devices. |
|
||||||
|
| -i<num> | Sets the interface number. 0 if left out. 0-255. |
|
||||||
|
| -s<pin> | Sets the specified pin's value to the value specified with the -v option. 0-11. |
|
||||||
|
| -r<pin> | Reads the pin's value and outputs it to the stdout. 0-11. |
|
||||||
|
| -v<val> | Specifies the output value. Either 0 or 1, other numbers default to 1. |
|
||||||
|
| -e | Enables expert mode. The expert mode enables you to write to reserved pins (5&6) and shouldn't be enabled unless you know what you're doing. |
|
||||||
|
|
||||||
|
## Practical examples
|
||||||
|
The two basic functions of TinI/O are reading and writing to I/O on a single device:
|
||||||
|
- To read, run `tinio -r<pin>` with <pin> replaced with the desired pin. The result will be printed to the stdout, followed by a newline.
|
||||||
|
- To set, run `tinio -s<pin> -v<val>` with <pin> replaced with the desired pin and <val> replaced with the value you want to write.
|
||||||
|
|
||||||
|
TinI/O is capable of handling up to 16 devices at once with the `-d` option, but there isn't a reliable way of identifying them. The best way to ensure the correct device order is to look at the device tree with `lsusb` and check which device comes first - it will have the first device number (0).
|
||||||
|
|
||||||
|
- To read from a specific device number, run `tinio -r<pin> -d<dev>` and replace <pin> with the pin number and <dev> with the device number.
|
||||||
|
- To write to a specific device run `tinio -s<pin> -v<val> -d<dev>` and replace <pin> with the pin number, <val> with the value and <dev> with the device number.
|
||||||
|
|
||||||
|
## Using TinI/O in your projects
|
||||||
|
+ As the TinI/O target chip (CY7C65211) isn't a microcontroller, it can't operate without a computer connected to it.
|
||||||
|
+ It can't do PWM.
|
||||||
|
+ Its I/O has 3.3V LVTTL logic level, and it's __not__ 5V compatible.
|
||||||
|
+ Its maximum output current is comparable to Arduino's at 25 mA.
|
||||||
|
+ When using CapSense, decouple the reserved 0 pin to the ground with a 2.2 nF capacitor and don't use it.
|
||||||
|
|
||||||
|
# Copyright, Links, ...
|
||||||
|
[Cypress' website](http://cypress.com)
|
||||||
|
[CY7C65211 Datasheet](http://http://www.cypress.com/file/139886/download)
|
||||||
|
[TinI/O Github](http://github.com/kristjan-komlosi/tinio)
|
||||||
|
[My Youtube channel - You may expect some videos of TinI/O there](https://www.youtube.com/channel/UCmcIwYA2I2YkmQs7xgMU-DA)
|
||||||
|
|
||||||
|
## __Copyright disclaimer__
|
||||||
|
No copyright infringement was intended to be made with this document or the TinI/O project. All of trademarks stated in this document are property of their owners.
|
||||||
|
|
||||||
|
This document is licensed under the GNU FDL License.
|
||||||
+9
-7
@@ -1,12 +1,14 @@
|
|||||||
CC=g++
|
all: library utility tinio
|
||||||
tinio:
|
|
||||||
echo "Building tinio..."
|
library:
|
||||||
$(CC) -lcyusbserial tinio.cpp -o tinio
|
cd library && make
|
||||||
echo "done."
|
|
||||||
|
utility: library
|
||||||
|
cd testUtility && make
|
||||||
|
tinio: library
|
||||||
|
g++ -lcyusbserial tinio.cpp -o tinio
|
||||||
|
|
||||||
install:
|
install:
|
||||||
echo "Installing tinio..."
|
|
||||||
mkdir -p /usr/share/tinio
|
mkdir -p /usr/share/tinio
|
||||||
cp -r flash /usr/share/tinio
|
cp -r flash /usr/share/tinio
|
||||||
cp tinio /usr/bin
|
cp tinio /usr/bin
|
||||||
echo "done."
|
|
||||||
File renamed without changes.
File renamed without changes.
File renamed without changes.
@@ -26,7 +26,7 @@
|
|||||||
#include <stdbool.h>
|
#include <stdbool.h>
|
||||||
#include <pthread.h>
|
#include <pthread.h>
|
||||||
#include <libusb-1.0/libusb.h>
|
#include <libusb-1.0/libusb.h>
|
||||||
#include "../../common/header/CyUSBSerial.h"
|
#include "../header/CyUSBSerial.h"
|
||||||
#pragma pack(1)
|
#pragma pack(1)
|
||||||
typedef struct CY_DEVICE {
|
typedef struct CY_DEVICE {
|
||||||
|
|
||||||
File renamed without changes.
File renamed without changes.
@@ -0,0 +1,219 @@
|
|||||||
|
/*
|
||||||
|
* Common header file of Cypress USB Serial
|
||||||
|
* Copyright (C) 2013 Cypress Semiconductor
|
||||||
|
*
|
||||||
|
* This library is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU Lesser General Public
|
||||||
|
* License as published by the Free Software Foundation; either
|
||||||
|
* version 2.1 of the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This library is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||||
|
* Lesser General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU Lesser General Public
|
||||||
|
* License along with this library; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <unistd.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include <errno.h>
|
||||||
|
#include <fcntl.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <pthread.h>
|
||||||
|
#include <libusb-1.0/libusb.h>
|
||||||
|
#include "../header/CyUSBSerial.h"
|
||||||
|
#pragma pack(1)
|
||||||
|
typedef struct CY_DEVICE {
|
||||||
|
|
||||||
|
unsigned char inEndpoint;
|
||||||
|
unsigned char outEndpoint;
|
||||||
|
unsigned char interruptEndpoint;
|
||||||
|
unsigned char interfaceNum;
|
||||||
|
bool i2cCancelEvent;
|
||||||
|
bool spiCancelEvent;
|
||||||
|
bool uartCancelEvent;
|
||||||
|
bool rtsValue;
|
||||||
|
bool dtrValue;
|
||||||
|
unsigned short numEndpoints;
|
||||||
|
CY_FLOW_CONTROL_MODES uartFlowControlMode;
|
||||||
|
struct libusb_transfer *spiTransfer;
|
||||||
|
struct libusb_transfer *uartTransfer;
|
||||||
|
libusb_device_handle *devHandle;
|
||||||
|
pthread_t spiThreadId;
|
||||||
|
pthread_t uartThreadId;
|
||||||
|
pthread_mutex_t readLock;
|
||||||
|
pthread_mutex_t writeLock;
|
||||||
|
pthread_mutex_t notificationLock;
|
||||||
|
CY_DEVICE_TYPE deviceType;
|
||||||
|
|
||||||
|
}CY_DEVICE,*PCY_DEVICE;
|
||||||
|
#pragma pack()
|
||||||
|
|
||||||
|
CY_RETURN_STATUS CyResetPipe (CY_HANDLE handl, UINT8);
|
||||||
|
#define CY_DEBUG_PRINT_INFO(...) //User need to enable this
|
||||||
|
#define CY_DEBUG_PRINT_ERROR(...) //printf
|
||||||
|
#define DUMP_DATA 1
|
||||||
|
#ifdef DUMP_DATA
|
||||||
|
#define CY_DUMP_DATA(INPUT,LEN)\
|
||||||
|
{\
|
||||||
|
int i = 0, len = LEN;\
|
||||||
|
while ((len)) {\
|
||||||
|
printf ("%x ", (INPUT)[i++]);\
|
||||||
|
len--;\
|
||||||
|
}\
|
||||||
|
printf ("\n");\
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
#define CY_DUMP_DATA (INPUT, LEN) do { }while (0);
|
||||||
|
#endif
|
||||||
|
#define CY_USB_SERIAL_TIMEOUT 5000
|
||||||
|
#define CY_EVENT_NOTIFICATION_TIMEOUT 0 //This will make the transfer infinite
|
||||||
|
|
||||||
|
#define CY_VENDOR_REQUEST_DEVICE_TO_HOST 0xC0
|
||||||
|
#define CY_VENDOR_REQUEST_HOST_TO_DEVICE 0x40
|
||||||
|
|
||||||
|
#define CY_CLASS_INTERFACE_REQUEST_DEVICE_TO_HOST 0XA1
|
||||||
|
#define CY_CLASS_INTERFACE_REQUEST_HOST_TO_DEVICE 0x21
|
||||||
|
//I2C related macros
|
||||||
|
#define CY_SCB_INDEX_POS 15
|
||||||
|
#define CY_I2C_CONFIG_LENGTH 16
|
||||||
|
#define CY_I2C_WRITE_COMMAND_POS 3
|
||||||
|
#define CY_I2C_WRITE_COMMAND_LEN_POS 4
|
||||||
|
#define CY_I2C_GET_STATUS_LEN 3
|
||||||
|
#define CY_I2C_MODE_WRITE 1
|
||||||
|
#define CY_I2C_MODE_READ 0
|
||||||
|
#define CY_I2C_ERROR_BIT (1)
|
||||||
|
#define CY_I2C_ARBITRATION_ERROR_BIT (1 << 1)
|
||||||
|
#define CY_I2C_NAK_ERROR_BIT (1 << 2)
|
||||||
|
#define CY_I2C_BUS_ERROR_BIT (1 << 3)
|
||||||
|
#define CY_I2C_STOP_BIT_ERROR (1 << 4)
|
||||||
|
#define CY_I2C_BUS_BUSY_ERROR (1 << 5)
|
||||||
|
#define CY_I2C_ENABLE_PRECISE_TIMING 1
|
||||||
|
#define CY_I2C_EVENT_NOTIFICATION_LEN 3
|
||||||
|
//SPI related Macros
|
||||||
|
#define CY_SPI_CONFIG_LEN 16
|
||||||
|
#define CY_SPI_EVENT_NOTIFICATION_LEN 2
|
||||||
|
#define CY_SPI_READ_BIT (1)
|
||||||
|
#define CY_SPI_WRITE_BIT (1 << 1)
|
||||||
|
#define CY_SPI_SCB_INDEX_BIT (1 << 15)
|
||||||
|
#define CY_SPI_GET_STATUS_LEN 4
|
||||||
|
#define CY_SPI_UNDERFLOW_ERROR (1)
|
||||||
|
#define CY_SPI_BUS_ERROR (1 << 1)
|
||||||
|
//Vendor UART related macros
|
||||||
|
#define CY_UART_SET_FLOW_CONTROL_CMD 0x60
|
||||||
|
#define CY_UART_SEND_BREAK_CMD 0x17
|
||||||
|
#define CY_UART_CONFIG_LEN 16
|
||||||
|
#define CY_SET_LINE_CONTROL_STATE_CMD 0x22
|
||||||
|
#define CY_UART_EVENT_NOTIFICATION_LEN 10
|
||||||
|
|
||||||
|
#define CY_UART_SERIAL_STATE_CARRIER_DETECT 1
|
||||||
|
#define CY_UART_SERIAL_STATE_TRANSMISSION_CARRIER (1 << 1)
|
||||||
|
#define CY_UART_SERIAL_STATE_BREAK_DETECTION (1<< 2)
|
||||||
|
#define CY_UART_SERIAL_STATE_RING_SIGNAL_DETECTION (1 << 3)
|
||||||
|
#define CY_UART_SERIAL_STATE_FRAMING_ERROR (1 << 4)
|
||||||
|
#define CY_UART_SERIAL_STATE_PARITY_ERROR (1 << 5)
|
||||||
|
#define CY_UART_SERIAL_STATUE_OVERRUN (1 << 6)
|
||||||
|
//Bootloader related macros
|
||||||
|
#define CY_BOOT_CONFIG_SIZE 64
|
||||||
|
#define CY_DEVICE_CONFIG_SIZE 512
|
||||||
|
#define CY_FIRMWARE_BREAKUP_SIZE 4096
|
||||||
|
#define CY_GET_SILICON_ID_LEN 4
|
||||||
|
#define CY_GET_FIRMWARE_VERSION_LEN 8
|
||||||
|
#define CY_GET_SIGNATURE_LEN 4
|
||||||
|
//PHDC related macros
|
||||||
|
#define CY_PHDC_SET_FEATURE 0X03
|
||||||
|
#define CY_PHDC_CLR_FEATURE 0X01
|
||||||
|
#define CY_PHDC_GET_DATA_STATUS 0x00
|
||||||
|
|
||||||
|
typedef enum CY_VENDOR_CMDS
|
||||||
|
{
|
||||||
|
CY_GET_VERSION_CMD = 0xB0, /* Get the version of the boot-loader.
|
||||||
|
value = 0, index = 0, length = 4;
|
||||||
|
data_in = 32 bit version. */
|
||||||
|
|
||||||
|
CY_GET_SIGNATURE_CMD = 0xBD, /*Get the signature of the firmware
|
||||||
|
It is suppose to be 'CYUS' for normal firmware
|
||||||
|
and 'CYBL' for Bootloader.*/
|
||||||
|
CY_UART_GET_CONFIG_CMD = 0xC0, /* Retreive the 16 byte UART configuration information.
|
||||||
|
MS bit of value indicates the SCB index.
|
||||||
|
length = 16, data_in = 16 byte configuration. */
|
||||||
|
CY_UART_SET_CONFIG_CMD, /* Update the 16 byte UART configuration information.
|
||||||
|
MS bit of value indicates the SCB index.
|
||||||
|
length = 16, data_out = 16 byte configuration information. */
|
||||||
|
CY_SPI_GET_CONFIG_CMD, /* Retreive the 16 byte SPI configuration information.
|
||||||
|
MS bit of value indicates the SCB index.
|
||||||
|
length = 16, data_in = 16 byte configuration. */
|
||||||
|
CY_SPI_SET_CONFIG_CMD, /* Update the 16 byte SPI configuration information.
|
||||||
|
MS bit of value indicates the SCB index.
|
||||||
|
length = 16, data_out = 16 byte configuration information. */
|
||||||
|
CY_I2C_GET_CONFIG_CMD, /* Retreive the 16 byte I2C configuration information.
|
||||||
|
MS bit of value indicates the SCB index.
|
||||||
|
length = 16, data_in = 16 byte configuration. */
|
||||||
|
CY_I2C_SET_CONFIG_CMD = 0xC5, /* Update the 16 byte I2C configuration information.
|
||||||
|
MS bit of value indicates the SCB index.
|
||||||
|
length = 16, data_out = 16 byte configuration information. */
|
||||||
|
CY_I2C_WRITE_CMD, /* Perform I2C write operation.
|
||||||
|
value = bit0 - start, bit1 - stop, bit3 - start on idle,
|
||||||
|
bits[14:8] - slave address, bit15 - scbIndex. length = 0. The
|
||||||
|
data is provided over the bulk endpoints. */
|
||||||
|
CY_I2C_READ_CMD, /* Perform I2C read operation.
|
||||||
|
value = bit0 - start, bit1 - stop, bit2 - Nak last byte,
|
||||||
|
bit3 - start on idle, bits[14:8] - slave address, bit15 - scbIndex,
|
||||||
|
length = 0. The data is provided over the bulk endpoints. */
|
||||||
|
CY_I2C_GET_STATUS_CMD, /* Retreive the I2C bus status.
|
||||||
|
value = bit0 - 0: TX 1: RX, bit15 - scbIndex, length = 3,
|
||||||
|
data_in = byte0: bit0 - flag, bit1 - bus_state, bit2 - SDA state,
|
||||||
|
bit3 - TX underflow, bit4 - arbitration error, bit5 - NAK
|
||||||
|
bit6 - bus error,
|
||||||
|
byte[2:1] Data count remaining. */
|
||||||
|
CY_I2C_RESET_CMD, /* The command cleans up the I2C state machine and frees the bus.
|
||||||
|
value = bit0 - 0: TX path, 1: RX path; bit15 - scbIndex,
|
||||||
|
length = 0. */
|
||||||
|
CY_SPI_READ_WRITE_CMD = 0xCA, /* The command starts a read / write operation at SPI.
|
||||||
|
value = bit 0 - RX enable, bit 1 - TX enable, bit 15 - scbIndex;
|
||||||
|
index = length of transfer. */
|
||||||
|
CY_SPI_RESET_CMD, /* The command resets the SPI pipes and allows it to receive new
|
||||||
|
request.
|
||||||
|
value = bit 15 - scbIndex */
|
||||||
|
CY_SPI_GET_STATUS_CMD, /* The command returns the current transfer status. The count will match
|
||||||
|
the TX pipe status at SPI end. For completion of read, read all data
|
||||||
|
at the USB end signifies the end of transfer.
|
||||||
|
value = bit 15 - scbIndex */
|
||||||
|
CY_JTAG_ENABLE_CMD = 0xD0, /* Enable JTAG module */
|
||||||
|
CY_JTAG_DISABLE_CMD, /* Disable JTAG module */
|
||||||
|
CY_JTAG_READ_CMD, /* JTAG read vendor command */
|
||||||
|
CY_JTAG_WRITE_CMD, /* JTAG write vendor command */
|
||||||
|
CY_GPIO_GET_CONFIG_CMD = 0xD8, /* Get the GPIO configuration: */
|
||||||
|
CY_GPIO_SET_CONFIG_CMD, /* Set the GPIO configuration */
|
||||||
|
CY_GPIO_GET_VALUE_CMD, /* Get GPIO value: */
|
||||||
|
CY_GPIO_SET_VALUE_CMD, /* Set the GPIO value:*/
|
||||||
|
CY_PROG_USER_FLASH_CMD = 0xE0, /*Program user flash area. The total space available is 512 bytes.
|
||||||
|
This can be accessed by the user from USB. The flash area
|
||||||
|
address offset is from 0x0000 to 0x00200 and can be written to
|
||||||
|
page wise (128 byte).*/
|
||||||
|
CY_READ_USER_FLASH_CMD, /*Read user flash area. The total space available is 512 bytes.
|
||||||
|
This can be accessed by the user from USB. The flash area
|
||||||
|
address offset is from 0x0000 to 0x00200 and can be written to
|
||||||
|
page wise (128 byte).*/
|
||||||
|
CY_DEVICE_RESET_CMD = 0xE3, /*Performs a device reset from firmware*/
|
||||||
|
|
||||||
|
} CY_VENDOR_CMDS;
|
||||||
|
|
||||||
|
//JTAG related Macros
|
||||||
|
#define CY_JTAG_OUT_EP 0x04
|
||||||
|
#define CY_JTAG_IN_EP 0x85
|
||||||
|
|
||||||
|
//GPIO related Macros
|
||||||
|
#define CY_GPIO_GET_LEN 2
|
||||||
|
#define CY_GPIO_SET_LEN 1
|
||||||
|
|
||||||
|
//PHDC related macros
|
||||||
|
#define CY_PHDC_GET_STATUS_LEN 2
|
||||||
|
#define CY_PHDC_CLR_FEATURE_WVALUE 0x1
|
||||||
|
#define CY_PHDC_SET_FEATURE_WVALUE 0x0101
|
||||||
|
|
||||||
@@ -1,12 +1,12 @@
|
|||||||
all:
|
all:
|
||||||
gcc -fPIC -g -Wall -o libcyusb.o -c cyusb.c -I ../../common/header
|
gcc -fPIC -g -Wall -o libcyusb.o -c cyusb.c -I ../header
|
||||||
gcc -fPIC -g -Wall -o libcyuart.o -c cyuart.c -I ../../common/header
|
gcc -fPIC -g -Wall -o libcyuart.o -c cyuart.c -I ../header
|
||||||
gcc -fPIC -g -Wall -o libcyi2c.o -c cyi2c.c -I ../../common/header
|
gcc -fPIC -g -Wall -o libcyi2c.o -c cyi2c.c -I ../header
|
||||||
gcc -fPIC -g -Wall -o libcyspi.o -c cyspi.c -I ../../common/header
|
gcc -fPIC -g -Wall -o libcyspi.o -c cyspi.c -I ../header
|
||||||
gcc -fPIC -g -Wall -o libcyphdc.o -c cyphdc.c -I ../../common/header
|
gcc -fPIC -g -Wall -o libcyphdc.o -c cyphdc.c -I ../header
|
||||||
gcc -fPIC -g -Wall -o libcyjtag.o -c cyjtag.c -I ../../common/header
|
gcc -fPIC -g -Wall -o libcyjtag.o -c cyjtag.c -I ../header
|
||||||
gcc -fPIC -g -Wall -o libcymisc.o -c cymisc.c -I ../../common/header
|
gcc -fPIC -g -Wall -o libcymisc.o -c cymisc.c -I ../header
|
||||||
gcc -fPIC -g -Wall -o libcyboot.o -c cyboot.c -I ../../common/header
|
gcc -fPIC -g -Wall -o libcyboot.o -c cyboot.c -I ../header
|
||||||
|
|
||||||
gcc -shared -g -Wl,-soname,libcyusbserial.so -o libcyusbserial.so.1 libcyusb.o libcyuart.o libcyi2c.o libcyspi.o libcyphdc.o libcyjtag.o libcymisc.o libcyboot.o -l usb-1.0
|
gcc -shared -g -Wl,-soname,libcyusbserial.so -o libcyusbserial.so.1 libcyusb.o libcyuart.o libcyi2c.o libcyspi.o libcyphdc.o libcyjtag.o libcymisc.o libcyboot.o -l usb-1.0
|
||||||
cp libcyusbserial.so.1 /usr/local/lib
|
cp libcyusbserial.so.1 /usr/local/lib
|
||||||
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
File renamed without changes.
@@ -0,0 +1 @@
|
|||||||
|
libcyusbserial.so.1
|
||||||
Binary file not shown.
File renamed without changes.
@@ -30,8 +30,8 @@
|
|||||||
#include <pthread.h>
|
#include <pthread.h>
|
||||||
#include <ctype.h>
|
#include <ctype.h>
|
||||||
|
|
||||||
#include "../../common/header/CyUSBSerial.h"
|
#include "../header/CyUSBSerial.h"
|
||||||
#include "../../common/header/CyUSBBootloader.h"
|
#include "../header/CyUSBBootloader.h"
|
||||||
|
|
||||||
#define CY_MAX_DEVICES 30
|
#define CY_MAX_DEVICES 30
|
||||||
#define CY_MAX_INTERFACES 4
|
#define CY_MAX_INTERFACES 4
|
||||||
File renamed without changes.
File renamed without changes.
Executable
BIN
Binary file not shown.
@@ -1,12 +1,8 @@
|
|||||||
all:
|
all:
|
||||||
# gcc -g -o CyUSBSerialTestUtility Test_Utility.c -lcyusbserial -w
|
# gcc -g -o CyUSBSerialTestUtility Test_Utility.c -lcyusbserial -w
|
||||||
gcc -g -o CyUSBSerialCommandUtility Command_Utility.c -lcyusbserial
|
gcc -g -o CyUSBSerialCommandUtility Command_Utility.c -lcyusbserial
|
||||||
cp 90-cyusb.rules /etc/udev/rules.d
|
cp 90-cyusb.rules /etc/udev/rules.d
|
||||||
cp CyUSBSerialCommandUtility /usr/bin/cy-config
|
cp CyUSBSerialCommandUtility /usr/bin/cy-config
|
||||||
cp CyUSBSerial.sh /usr/bin
|
cp CyUSBSerial.sh /usr/bin
|
||||||
chmod 777 /usr/bin/CyUSBSerial.sh
|
chmod 777 /usr/bin/CyUSBSerial.sh
|
||||||
clean:
|
|
||||||
rm -f CyUSBSerialCommandUtility
|
|
||||||
help:
|
|
||||||
@echo 'make would compile and create the library and create a link'
|
|
||||||
@echo 'make clean would remove the library and the soft link to the library (soname)'
|
|
||||||
BIN
Binary file not shown.
+1
-2
@@ -1,7 +1,6 @@
|
|||||||
// Tinio - the Tiny I/O tool
|
// Tinio - the Tiny I/O tool
|
||||||
#include <CyUSBSerial.h>
|
#include "header/CyUSBSerial.h"
|
||||||
#include <ctype.h>
|
#include <ctype.h>
|
||||||
#include <libusb.h>
|
|
||||||
#include <stdint.h>
|
#include <stdint.h>
|
||||||
#include <stdio.h>
|
#include <stdio.h>
|
||||||
#include <stdlib.h>
|
#include <stdlib.h>
|
||||||
|
|||||||
Binary file not shown.
-137
@@ -1,137 +0,0 @@
|
|||||||
================================================================================
|
|
||||||
Cypress Semiconductor Corporation
|
|
||||||
CyUSB Serial DVK test utility for I2C/SPI
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
This utility is used for testing I2C/SPI master mode functionality on the
|
|
||||||
Cypress CyUSBSerial DVK.
|
|
||||||
|
|
||||||
The utility writes to I2C/SPI flash devices on the DVK, reads the data back
|
|
||||||
and verifies the data read for integrity.
|
|
||||||
|
|
||||||
Release components:
|
|
||||||
================================================================================
|
|
||||||
1. Test_Utility.c ==> Source file of the command line test utility
|
|
||||||
2. 90-cyusb.rules ==> udev rules for changing the mode of usb device node.
|
|
||||||
3. CyUSBSerial.sh ==> Script file for implementing hotplug feature in linux.
|
|
||||||
4. Makefile ==> make file for compiling and installing the application.
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
|
|
||||||
Pre-requisites:
|
|
||||||
================================================================================
|
|
||||||
1. libusb-1.0.9 is required for compilation and functioning of the APIs in the
|
|
||||||
USB Serial library.
|
|
||||||
2. The CyUSBSerial library (libcyusbserial.so) should be compiled and installed
|
|
||||||
on the test machine.
|
|
||||||
3. GNU Make and the GCC tool-chain are used for the build process.
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
Installation steps:
|
|
||||||
================================================================================
|
|
||||||
1. Change to the folder where the utility source files are extracted.
|
|
||||||
2. Invoke 'make' to build compile the utility, and to install the configuration
|
|
||||||
files at the appropriate locations. This should be done from a super-user
|
|
||||||
(sudo) shell, because the configuration files need to be copied into system
|
|
||||||
folders (/usr/local/bin).
|
|
||||||
3. Use the CyUSBSerial command to start the test utility.
|
|
||||||
|
|
||||||
Note:
|
|
||||||
The udev daemon needs to be restarted to reflect the udev rule changes that
|
|
||||||
are installed as part of the make command.
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
Using the test utility:
|
|
||||||
================================================================================
|
|
||||||
1. On starting the utility, the Cypress USB Serial devices that are connected
|
|
||||||
are listed along with their device numbers, interface numbers and
|
|
||||||
functionalities (SPI or I2C).
|
|
||||||
|
|
||||||
$ CyUSBSerial
|
|
||||||
----------------------------------------------------------------------
|
|
||||||
Device Number | VID | PID | INTERFACE NUMBER | FUNCTIONALITY
|
|
||||||
----------------------------------------------------------------------
|
|
||||||
0 |4b4 |a | 0 | VENDOR_I2C
|
|
||||||
0 |4b4 |a | 1 | VENDOR_SPI
|
|
||||||
0 |4b4 |a | 2 | NA
|
|
||||||
----------------------------------------------------------------------
|
|
||||||
|
|
||||||
2. A menu providing the various operations is also printed:
|
|
||||||
----------------------------------------------------------------------
|
|
||||||
1: Print list of devices
|
|
||||||
2: Select device...No device selected !!
|
|
||||||
3: Enter I2C/SPI Flash page address and length to write/read.
|
|
||||||
4: Verify data
|
|
||||||
5: Exit
|
|
||||||
----------------------------------------------------------------------
|
|
||||||
|
|
||||||
3. On selecting option 2, the utility prompts for the device and interface
|
|
||||||
number to be selected for testing.
|
|
||||||
|
|
||||||
-----------------------------------
|
|
||||||
Enter Device number to select:
|
|
||||||
0
|
|
||||||
Enter interface number:
|
|
||||||
1
|
|
||||||
-----------------------------------
|
|
||||||
|
|
||||||
Once the selections are made, the menu will be updated with the details.
|
|
||||||
----------------------------------------------------------------------
|
|
||||||
1: Print list of devices
|
|
||||||
2: Change device selection--selected device: [Device number 0] : [Interface No 1] : SPI
|
|
||||||
3: Enter I2C/SPI Flash page address and length to write/read.
|
|
||||||
4: Verify data
|
|
||||||
5: Exit
|
|
||||||
----------------------------------------------------------------------
|
|
||||||
|
|
||||||
4. Option 3 can be selected now to do data read/write to the I2C/SPI flash
|
|
||||||
device. The utility prompts for the page address to be written as well as
|
|
||||||
the length of data to be written.
|
|
||||||
|
|
||||||
------------------------------------------------
|
|
||||||
Enter Page address ... (less than 65536)
|
|
||||||
1234
|
|
||||||
Enter length to read/write ... (less than 256)
|
|
||||||
32
|
|
||||||
------------------------------------------------
|
|
||||||
|
|
||||||
Length needs to be less than or equal to 256 bytes in the case of SPI access,
|
|
||||||
and less than or equal to 64 bytes in the case of I2C access. Page address
|
|
||||||
needs to be less than 65536 in case of SPI and 256 in case of I2C.
|
|
||||||
|
|
||||||
Once the values are selected, the menu is updated with the details as below:
|
|
||||||
-------------------------------------------------------------------
|
|
||||||
1: Print list of devices
|
|
||||||
2: Change device selection--selected device: [Device number 0] : [Interface No 1] : SPI
|
|
||||||
3: Change Flash page address and length ...Entered is page address 1234 and length 123
|
|
||||||
4: Verify data
|
|
||||||
5: Exit
|
|
||||||
-------------------------------------------------------------------
|
|
||||||
|
|
||||||
5. Selecting option 4 causes the utility to write a randomly generated data
|
|
||||||
sequence to the flash device, read it back, and verify the data read back.
|
|
||||||
|
|
||||||
The data pattern written and read back will be displayed as shown below:
|
|
||||||
--------------------------------------------------------------------
|
|
||||||
67 c6 69 73 51 ff 4a ec 29 cd ba ab f2 fb e3 46 7c c2 54 f8 1b e8 e7 8d 76 5a 2e 63 33 9f c9 9a
|
|
||||||
--------------------------------------------------------------------
|
|
||||||
Data Read back is:
|
|
||||||
---------------------------------------------------------------------
|
|
||||||
67 c6 69 73 51 ff 4a ec 29 cd ba ab f2 fb e3 46 7c c2 54 f8 1b e8 e7 8d 76 5a 2e 63 33 9f c9 9a
|
|
||||||
---------------------------------------------------------------------
|
|
||||||
Data verified successfully
|
|
||||||
-------------------------------------------------------------------
|
|
||||||
|
|
||||||
6. The utility runs through these menu options until the user selects the
|
|
||||||
exit option (5).
|
|
||||||
|
|
||||||
7. If a new Cypress USB Serial device is attached or an existing device is
|
|
||||||
removed while the utility is running, a notification is printed on the
|
|
||||||
console.
|
|
||||||
|
|
||||||
---------------------------------------
|
|
||||||
Device of interest Removed/Added
|
|
||||||
---------------------------------------
|
|
||||||
================================================================================
|
|
||||||
|
|
||||||
EOF
|
|
||||||
-224
@@ -1,224 +0,0 @@
|
|||||||
/********************************************************************************/
|
|
||||||
/* */
|
|
||||||
/* Module: jbiexprt.h */
|
|
||||||
/* */
|
|
||||||
/* Copyright (C) Altera Corporation 1998-2001 */
|
|
||||||
/* */
|
|
||||||
/* Description: Jam STAPL ByteCode Player Export Header File */
|
|
||||||
/* */
|
|
||||||
/* Revisions: */
|
|
||||||
/* */
|
|
||||||
/********************************************************************************/
|
|
||||||
|
|
||||||
#ifndef INC_JBIEXPRT_H
|
|
||||||
#define INC_JBIEXPRT_H
|
|
||||||
|
|
||||||
/********************************************************************************/
|
|
||||||
/* */
|
|
||||||
/* Return codes from most JBI functions */
|
|
||||||
/* */
|
|
||||||
/********************************************************************************/
|
|
||||||
|
|
||||||
#define JBI_RETURN_TYPE int
|
|
||||||
|
|
||||||
#define JBIC_SUCCESS 0
|
|
||||||
#define JBIC_OUT_OF_MEMORY 1
|
|
||||||
#define JBIC_IO_ERROR 2
|
|
||||||
/* #define JAMC_SYNTAX_ERROR 3 */
|
|
||||||
#define JBIC_UNEXPECTED_END 4
|
|
||||||
#define JBIC_UNDEFINED_SYMBOL 5
|
|
||||||
/* #define JAMC_REDEFINED_SYMBOL 6 */
|
|
||||||
#define JBIC_INTEGER_OVERFLOW 7
|
|
||||||
#define JBIC_DIVIDE_BY_ZERO 8
|
|
||||||
#define JBIC_CRC_ERROR 9
|
|
||||||
#define JBIC_INTERNAL_ERROR 10
|
|
||||||
#define JBIC_BOUNDS_ERROR 11
|
|
||||||
/* #define JAMC_TYPE_MISMATCH 12 */
|
|
||||||
/* #define JAMC_ASSIGN_TO_CONST 13 */
|
|
||||||
/* #define JAMC_NEXT_UNEXPECTED 14 */
|
|
||||||
/* #define JAMC_POP_UNEXPECTED 15 */
|
|
||||||
/* #define JAMC_RETURN_UNEXPECTED 16 */
|
|
||||||
/* #define JAMC_ILLEGAL_SYMBOL 17 */
|
|
||||||
#define JBIC_VECTOR_MAP_FAILED 18
|
|
||||||
#define JBIC_USER_ABORT 19
|
|
||||||
#define JBIC_STACK_OVERFLOW 20
|
|
||||||
#define JBIC_ILLEGAL_OPCODE 21
|
|
||||||
/* #define JAMC_PHASE_ERROR 22 */
|
|
||||||
/* #define JAMC_SCOPE_ERROR 23 */
|
|
||||||
#define JBIC_ACTION_NOT_FOUND 24
|
|
||||||
|
|
||||||
/********************************************************************************/
|
|
||||||
/* */
|
|
||||||
/* Macro Definitions */
|
|
||||||
/* */
|
|
||||||
/********************************************************************************/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* For DOS port, program data is stored in a set of 16K pages, accessed
|
|
||||||
* through a pointer table. For 32-bit version, the buffer is continuous.
|
|
||||||
* The macro GET_BYTE gets a single byte for either case.
|
|
||||||
*/
|
|
||||||
#if PORT==DOS
|
|
||||||
#define PROGRAM_PTR unsigned char **
|
|
||||||
#else
|
|
||||||
#define PROGRAM_PTR unsigned char *
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if PORT==DOS
|
|
||||||
#define GET_BYTE(x) (jbi_program[(x) >> 14L][(x) & 0x3fffL])
|
|
||||||
#else
|
|
||||||
#define GET_BYTE(x) (program[x])
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define GET_WORD(x) \
|
|
||||||
(((((unsigned short) GET_BYTE(x)) << 8) & 0xFF00) | \
|
|
||||||
(((unsigned short) GET_BYTE((x)+1)) & 0x00FF))
|
|
||||||
|
|
||||||
#define GET_DWORD(x) \
|
|
||||||
(((((unsigned long) GET_BYTE(x)) << 24L) & 0xFF000000L) | \
|
|
||||||
((((unsigned long) GET_BYTE((x)+1)) << 16L) & 0x00FF0000L) | \
|
|
||||||
((((unsigned long) GET_BYTE((x)+2)) << 8L) & 0x0000FF00L) | \
|
|
||||||
(((unsigned long) GET_BYTE((x)+3)) & 0x000000FFL))
|
|
||||||
|
|
||||||
/********************************************************************************/
|
|
||||||
/* */
|
|
||||||
/* Structured Types */
|
|
||||||
/* */
|
|
||||||
/********************************************************************************/
|
|
||||||
|
|
||||||
typedef struct JBI_PROCINFO_STRUCT
|
|
||||||
{
|
|
||||||
char *name;
|
|
||||||
unsigned char attributes;
|
|
||||||
struct JBI_PROCINFO_STRUCT *next;
|
|
||||||
}
|
|
||||||
JBI_PROCINFO;
|
|
||||||
|
|
||||||
/********************************************************************************/
|
|
||||||
/* */
|
|
||||||
/* Global Data Prototypes */
|
|
||||||
/* */
|
|
||||||
/********************************************************************************/
|
|
||||||
|
|
||||||
#if PORT==DOS
|
|
||||||
extern unsigned char jbi_aca_out_buffer[8192 + 1024];
|
|
||||||
#endif
|
|
||||||
|
|
||||||
extern PROGRAM_PTR jbi_program;
|
|
||||||
|
|
||||||
extern char *jbi_workspace;
|
|
||||||
|
|
||||||
extern long jbi_workspace_size;
|
|
||||||
|
|
||||||
/********************************************************************************/
|
|
||||||
/* */
|
|
||||||
/* Function Prototypes */
|
|
||||||
/* */
|
|
||||||
/********************************************************************************/
|
|
||||||
|
|
||||||
JBI_RETURN_TYPE jbi_execute
|
|
||||||
(
|
|
||||||
PROGRAM_PTR program,
|
|
||||||
long program_size,
|
|
||||||
char *workspace,
|
|
||||||
long workspace_size,
|
|
||||||
char *action,
|
|
||||||
char **init_list,
|
|
||||||
int reset_jtag,
|
|
||||||
long *error_address,
|
|
||||||
int *exit_code,
|
|
||||||
int *format_version
|
|
||||||
);
|
|
||||||
|
|
||||||
JBI_RETURN_TYPE jbi_get_note
|
|
||||||
(
|
|
||||||
PROGRAM_PTR program,
|
|
||||||
long program_size,
|
|
||||||
long *offset,
|
|
||||||
char *key,
|
|
||||||
char *value,
|
|
||||||
int length
|
|
||||||
);
|
|
||||||
|
|
||||||
JBI_RETURN_TYPE jbi_check_crc
|
|
||||||
(
|
|
||||||
PROGRAM_PTR program,
|
|
||||||
long program_size,
|
|
||||||
unsigned short *expected_crc,
|
|
||||||
unsigned short *actual_crc
|
|
||||||
);
|
|
||||||
|
|
||||||
JBI_RETURN_TYPE jbi_get_file_info
|
|
||||||
(
|
|
||||||
PROGRAM_PTR program,
|
|
||||||
long program_size,
|
|
||||||
int *format_version,
|
|
||||||
int *action_count,
|
|
||||||
int *procedure_count
|
|
||||||
);
|
|
||||||
|
|
||||||
JBI_RETURN_TYPE jbi_get_action_info
|
|
||||||
(
|
|
||||||
PROGRAM_PTR program,
|
|
||||||
long program_size,
|
|
||||||
int index,
|
|
||||||
char **name,
|
|
||||||
char **description,
|
|
||||||
JBI_PROCINFO **procedure_list
|
|
||||||
);
|
|
||||||
|
|
||||||
int jbi_jtag_io
|
|
||||||
(
|
|
||||||
int tms,
|
|
||||||
int tdi,
|
|
||||||
int read_tdo
|
|
||||||
);
|
|
||||||
|
|
||||||
void jbi_message
|
|
||||||
(
|
|
||||||
char *message_text
|
|
||||||
);
|
|
||||||
|
|
||||||
void jbi_export_integer
|
|
||||||
(
|
|
||||||
char *key,
|
|
||||||
long value
|
|
||||||
);
|
|
||||||
|
|
||||||
void jbi_export_boolean_array
|
|
||||||
(
|
|
||||||
char *key,
|
|
||||||
unsigned char *data,
|
|
||||||
long count
|
|
||||||
);
|
|
||||||
|
|
||||||
void jbi_delay
|
|
||||||
(
|
|
||||||
long microseconds
|
|
||||||
);
|
|
||||||
|
|
||||||
int jbi_vector_map
|
|
||||||
(
|
|
||||||
int signal_count,
|
|
||||||
char **signals
|
|
||||||
);
|
|
||||||
|
|
||||||
int jbi_vector_io
|
|
||||||
(
|
|
||||||
int signal_count,
|
|
||||||
long *dir_vect,
|
|
||||||
long *data_vect,
|
|
||||||
long *capture_vect
|
|
||||||
);
|
|
||||||
|
|
||||||
void *jbi_malloc
|
|
||||||
(
|
|
||||||
unsigned int size
|
|
||||||
);
|
|
||||||
|
|
||||||
void jbi_free
|
|
||||||
(
|
|
||||||
void *ptr
|
|
||||||
);
|
|
||||||
|
|
||||||
#endif /* INC_JBIEXPRT_H */
|
|
||||||
@@ -1,43 +0,0 @@
|
|||||||
/****************************************************************************/
|
|
||||||
/* */
|
|
||||||
/* Module: jbiport.h */
|
|
||||||
/* */
|
|
||||||
/* Copyright (C) Altera Corporation 2000-2001 */
|
|
||||||
/* */
|
|
||||||
/* Description: Defines porting macros */
|
|
||||||
/* */
|
|
||||||
/****************************************************************************/
|
|
||||||
|
|
||||||
#ifndef INC_JBIPORT_H
|
|
||||||
#define INC_JBIPORT_H
|
|
||||||
|
|
||||||
/*
|
|
||||||
* PORT defines the target platform: DOS, WINDOWS, UNIX, or EMBEDDED
|
|
||||||
*
|
|
||||||
* PORT = DOS means a 16-bit DOS console-mode application
|
|
||||||
*
|
|
||||||
* PORT = WINDOWS means a 32-bit WIN32 console-mode application for
|
|
||||||
* Windows 95, 98, 2000, ME or NT. On NT this will use the
|
|
||||||
* DeviceIoControl() API to access the Parallel Port.
|
|
||||||
*
|
|
||||||
* PORT = UNIX means any UNIX system. BitBlaster access is support via
|
|
||||||
* the standard ANSI system calls open(), read(), write().
|
|
||||||
* The ByteBlaster is not supported.
|
|
||||||
*
|
|
||||||
* PORT = EMBEDDED means all DOS, WINDOWS, and UNIX code is excluded.
|
|
||||||
* Remaining code supports 16 and 32-bit compilers.
|
|
||||||
* Additional porting steps may be necessary. See readme
|
|
||||||
* file for more details.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define DOS 2
|
|
||||||
#define WINDOWS 3
|
|
||||||
#define UNIX 4
|
|
||||||
#define EMBEDDED 5
|
|
||||||
|
|
||||||
#ifndef PORT
|
|
||||||
/* change this line to build a different port */
|
|
||||||
#define PORT EMBEDDED
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* INC_JBIPORT_H */
|
|
||||||
Reference in new issue
Block a user