kristjank/tinio
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
[ Kristjan Komloši HomePC ]
2016-12-21 18:19:26 +01:00
commit 4ec59a4b81
235 changed files with 127199 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
CyUSBSerial_SDK_Linux/linux/testUtility/90-cyusb.rules Normal file
View File

@@ -0,0 +1,5 @@
# Cypress USB driver for FX2 and FX3 (C) Cypress Semiconductor Corporation / ATR-LABS
# Rules written by V. Radhakrishnan ( rk@atr-labs.com )
# Cypress USB vendor ID = 0x04b4
KERNEL=="*", SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ACTION=="add", ATTR{idVendor}=="04b4", MODE="666", TAG="cyusb_dev", RUN+="/usr/bin/CyUSBSerial.sh A"
KERNEL=="*", SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ACTION=="remove", TAG=="cyusb_dev", RUN+="/usr/bin/CyUSBSerial.sh R"

7
CyUSBSerial_SDK_Linux/linux/testUtility/CyUSBSerial.sh Normal file
View File

@@ -0,0 +1,7 @@
#!/bin/bash
pid=`pidof CyUSBSerialTestUtility`
if [ "$pid" ]; then
kill -s SIGUSR1 $pid
fi

BIN
CyUSBSerial_SDK_Linux/linux/testUtility/CyUSBSerialTestUtility Executable file
View File

Binary file not shown.

11
CyUSBSerial_SDK_Linux/linux/testUtility/Makefile Normal file
View File

@@ -0,0 +1,11 @@
all:
gcc -g -o CyUSBSerialTestUtility Test_Utility.c -lcyusbserial -w
cp 90-cyusb.rules /etc/udev/rules.d
cp CyUSBSerialTestUtility /usr/bin
cp CyUSBSerial.sh /usr/bin
chmod 777 /usr/bin/CyUSBSerial.sh
clean:
rm -f CyUSBSerialTestUtility
help:
@echo 'make would compile and create the library and create a link'
@echo 'make clean would remove the library and the soft link to the library (soname)'

137
CyUSBSerial_SDK_Linux/linux/testUtility/README.txt Normal file
View File

@@ -0,0 +1,137 @@
================================================================================
Cypress Semiconductor Corporation
CyUSB Serial DVK test utility for I2C/SPI
================================================================================
This utility is used for testing I2C/SPI master mode functionality on the
Cypress CyUSBSerial DVK.
The utility writes to I2C/SPI flash devices on the DVK, reads the data back
and verifies the data read for integrity.
Release components:
================================================================================
1. Test_Utility.c ==> Source file of the command line test utility
2. 90-cyusb.rules ==> udev rules for changing the mode of usb device node.
3. CyUSBSerial.sh ==> Script file for implementing hotplug feature in linux.
4. Makefile ==> make file for compiling and installing the application.
================================================================================
Pre-requisites:
================================================================================
1. libusb-1.0.9 is required for compilation and functioning of the APIs in the
USB Serial library.
2. The CyUSBSerial library (libcyusbserial.so) should be compiled and installed
on the test machine.
3. GNU Make and the GCC tool-chain are used for the build process.
================================================================================
Installation steps:
================================================================================
1. Change to the folder where the utility source files are extracted.
2. Invoke 'make' to build compile the utility, and to install the configuration
files at the appropriate locations. This should be done from a super-user
(sudo) shell, because the configuration files need to be copied into system
folders (/usr/local/bin).
3. Use the CyUSBSerial command to start the test utility.
Note:
The udev daemon needs to be restarted to reflect the udev rule changes that
are installed as part of the make command.
================================================================================
Using the test utility:
================================================================================
1. On starting the utility, the Cypress USB Serial devices that are connected
are listed along with their device numbers, interface numbers and
functionalities (SPI or I2C).
$ CyUSBSerial
----------------------------------------------------------------------
Device Number | VID | PID | INTERFACE NUMBER | FUNCTIONALITY
----------------------------------------------------------------------
0 |4b4 |a | 0 | VENDOR_I2C
0 |4b4 |a | 1 | VENDOR_SPI
0 |4b4 |a | 2 | NA
----------------------------------------------------------------------
2. A menu providing the various operations is also printed:
----------------------------------------------------------------------
1: Print list of devices
2: Select device...No device selected !!
3: Enter I2C/SPI Flash page address and length to write/read.
4: Verify data
5: Exit
----------------------------------------------------------------------
3. On selecting option 2, the utility prompts for the device and interface
number to be selected for testing.
-----------------------------------
Enter Device number to select:
0
Enter interface number:
1
-----------------------------------
Once the selections are made, the menu will be updated with the details.
----------------------------------------------------------------------
1: Print list of devices
2: Change device selection--selected device: [Device number 0] : [Interface No 1] : SPI
3: Enter I2C/SPI Flash page address and length to write/read.
4: Verify data
5: Exit
----------------------------------------------------------------------
4. Option 3 can be selected now to do data read/write to the I2C/SPI flash
device. The utility prompts for the page address to be written as well as
the length of data to be written.
------------------------------------------------
Enter Page address ... (less than 65536)
1234
Enter length to read/write ... (less than 256)
32
------------------------------------------------
Length needs to be less than or equal to 256 bytes in the case of SPI access,
and less than or equal to 64 bytes in the case of I2C access. Page address
needs to be less than 65536 in case of SPI and 256 in case of I2C.
Once the values are selected, the menu is updated with the details as below:
-------------------------------------------------------------------
1: Print list of devices
2: Change device selection--selected device: [Device number 0] : [Interface No 1] : SPI
3: Change Flash page address and length ...Entered is page address 1234 and length 123
4: Verify data
5: Exit
-------------------------------------------------------------------
5. Selecting option 4 causes the utility to write a randomly generated data
sequence to the flash device, read it back, and verify the data read back.
The data pattern written and read back will be displayed as shown below:
--------------------------------------------------------------------
67 c6 69 73 51 ff 4a ec 29 cd ba ab f2 fb e3 46 7c c2 54 f8 1b e8 e7 8d 76 5a 2e 63 33 9f c9 9a
--------------------------------------------------------------------
Data Read back is:
---------------------------------------------------------------------
67 c6 69 73 51 ff 4a ec 29 cd ba ab f2 fb e3 46 7c c2 54 f8 1b e8 e7 8d 76 5a 2e 63 33 9f c9 9a
---------------------------------------------------------------------
Data verified successfully
-------------------------------------------------------------------
6. The utility runs through these menu options until the user selects the
exit option (5).
7. If a new Cypress USB Serial device is attached or an existing device is
removed while the utility is running, a notification is printed on the
console.
---------------------------------------
Device of interest Removed/Added
---------------------------------------
================================================================================
EOF

605
CyUSBSerial_SDK_Linux/linux/testUtility/Test_Utility.c Normal file
View File

@@ -0,0 +1,605 @@
/*
* Test utility
* Copyright (C) 2013 Cypress Semiconductor
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <getopt.h>
#include <string.h>
#include <signal.h>
#include <stdbool.h>
#include <unistd.h>
#include <sys/time.h>
#include <pthread.h>
#include <ctype.h>
#include "../../common/header/CyUSBSerial.h"
#define CY_MAX_DEVICES 30
#define CY_MAX_INTERFACES 4
typedef struct _CY_DEVICE_STRUCT {
int deviceNumber;
int interfaceFunctionality[CY_MAX_INTERFACES];
bool isI2c;
bool isSpi;
int numInterface;
}CY_DEVICE_STRUCT;
CY_DEVICE_STRUCT *glDevice;
int i2cDeviceIndex[CY_MAX_DEVICES][CY_MAX_INTERFACES];
unsigned char *deviceNumber = NULL;
int cyDevices, i2cDevices = 0, numDevices = 0;
int selectedDeviceNum = -1, selectedInterfaceNum = -1;
bool exitApp = false;
unsigned short pageAddress = -1;
short readWriteLength = -1;
bool deviceAddedRemoved = false;
int getUserInput()
{
char userInput[6], x;
int output,i = 0;
bool isDigit = true;
x = getchar();
while (x != '\n'){
if (i < 5){
userInput[i] = x;
i++;
}
if (!isdigit(x))
isDigit = false;
x = getchar();
}
userInput[i] = '\0';
if (isDigit == false)
return -1;
output = atoi(userInput);
return output;
}
void deviceHotPlug () {
CY_RETURN_STATUS rStatus;
deviceAddedRemoved = true;
selectedDeviceNum = -1;
selectedInterfaceNum = -1;
printf ("Device of interest Removed/Added \n");
rStatus = CyGetListofDevices (&numDevices);
if (rStatus != CY_SUCCESS) {
printf ("CY:Error in Getting List of Devices: Error NO:<%d> \n", rStatus);
return rStatus;
}
printListOfDevices (false);
}
int main (int argc, char **agrv)
{
int index = 0, i, j, userInput;
int tempSelectedDeviceNum, tempSelectedInterfaceNum, tempPageAddress, tempLength;
CY_RETURN_STATUS rStatus;
signal (SIGUSR1, deviceHotPlug);
glDevice = (CY_DEVICE_STRUCT *)malloc (CY_MAX_DEVICES *sizeof (CY_DEVICE_STRUCT));
if (glDevice == NULL){
printf ("Memory allocation failed ...!! \n");
return -1;
}
rStatus = CyLibraryInit ();
if (rStatus != CY_SUCCESS) {
printf ("CY:Error in Doing library init Error NO:<%d> \n", rStatus);
return rStatus;
}
rStatus = CyGetListofDevices (&numDevices);
if (rStatus != CY_SUCCESS) {
printf ("CY:Error in Getting List of Devices: Error NO:<%d> \n", rStatus);
return rStatus;
}
printListOfDevices(true);
do {
printf ("-------------------------------------------------------------------\n");
printf ("1: Print list of devices \n");
if (selectedDeviceNum != -1 && selectedInterfaceNum != -1){
printf ("2: Change device selection--selected device: [Device number %d] : [Interface No %d]",\
selectedDeviceNum, selectedInterfaceNum);
if (glDevice[selectedDeviceNum].interfaceFunctionality[selectedInterfaceNum] == CY_TYPE_I2C)
printf (" : I2C\n");
else if (glDevice[selectedDeviceNum].interfaceFunctionality[selectedInterfaceNum] == CY_TYPE_SPI)
printf (" : SPI\n");
else
printf (" : NA\n");
}
else
printf ("2: Select device...No device selected !!\n");
if (readWriteLength != -1 && pageAddress != -1){
printf ("3: Change Flash page address and length ...Entered is page address %d and length %d\n", pageAddress, readWriteLength);
printf ("4: Verify data\n5: Exit\n");
}
else
printf ("3: Enter I2C/SPI Flash page address and length to write/read.\n4: Verify data\n5: Exit\n");
printf ("-------------------------------------------------------------------\n");
userInput = getUserInput();
if (userInput < 1 || userInput > 5){
printf ("Wrong selection code ... Enter again \n");
continue;
}
switch (userInput){
case 1:
printListOfDevices(true);
break;
case 2:
if (cyDevices == 0) {
printf ("No device of interest connected ...!!\n");
continue;
}
printf ("Enter Device number to be selected.. \n");
tempSelectedDeviceNum = getUserInput();
//printf ("Selected device number is %d \n",tempSelectedDeviceNum);
if (tempSelectedDeviceNum >= cyDevices || tempSelectedDeviceNum == -1){
printf ("Wrong device selection \n");
continue;
}
printf ("Enter interface number..\n");
tempSelectedInterfaceNum = getUserInput();
//printf ("Selected device number is %d %d\n",tempSelectedInterfaceNum, glDevice[tempSelectedDeviceNum].numInterface);
if (tempSelectedInterfaceNum >= glDevice[tempSelectedDeviceNum].numInterface ||
tempSelectedInterfaceNum == -1) {
printf ("Wrong interface Selection selection \n");
continue;
}
if ((glDevice[tempSelectedDeviceNum].interfaceFunctionality[tempSelectedInterfaceNum] == -1)){
printf ("Selected device does not have I2C or SPI !!! \n");
continue;
}
if (deviceAddedRemoved == true) {
printf ("Device of interest was added/removed .... Print and select from new list\n");
continue;
}
selectedDeviceNum = tempSelectedDeviceNum;
selectedInterfaceNum = tempSelectedInterfaceNum;
//pageAddress = -1;
//readWriteLength = -1;
break;
case 3:
if (selectedDeviceNum == -1) {
printf ("Select proper device!!! \n");
continue;
}
if (selectedDeviceNum >= cyDevices){
printf ("Select proper device!!! \n");
continue;
}
if (glDevice[selectedDeviceNum].interfaceFunctionality[selectedInterfaceNum] == CY_TYPE_I2C){
printf ("Enter Page address... (less than 256)\n");
tempPageAddress = getUserInput();
printf ("Enter length to read/write...(less than 64)\n");
tempLength = getUserInput();
if (deviceAddedRemoved == true) {
printf ("Device of interest was added/removed .... Print and select from new list\n");
continue;
}
if (tempPageAddress > 256){
printf ("Invalid page address ..Enter page address less than 256 (1 bytes len)\n");
continue;
}
if (tempLength < 0 || tempLength > 64){
printf ("Invalid Length ..Enter length less than 64 bytes\n");
continue;
}
pageAddress = tempPageAddress;
readWriteLength = tempLength;
break;
}
if (glDevice[selectedDeviceNum].interfaceFunctionality[selectedInterfaceNum] == CY_TYPE_SPI){
printf ("Enter Page address... (less than 65536)\n");
tempPageAddress = getUserInput();
printf ("Enter length to read/write...(less than 256)\n");
tempLength = getUserInput();
if (deviceAddedRemoved == true) {
printf ("Device of interest was added/removed .... Print and select from new list\n");
continue;
}
if (tempPageAddress > 65536){
printf ("Invalid page address ..Enter page address less than 65536 (1 bytes len)\n");
continue;
}
if (tempLength < 0 || tempLength > 256){
printf ("Invalid Length ..Enter length less than 256 bytes\n");
continue;
}
pageAddress = tempPageAddress;
readWriteLength = tempLength;
break;
}
case 4:
if (selectedDeviceNum == -1) {
printf ("Select proper device!!! \n");
continue;
}
if (glDevice[selectedDeviceNum].interfaceFunctionality[selectedInterfaceNum] == -1){
printf ("Selected device does not have I2C or SPI !!! \n");
continue;
}
if ((pageAddress == -1) || (readWriteLength == -1)){
printf ("Select proper page address and length !!! \n");
continue;
}
if (glDevice[selectedDeviceNum].interfaceFunctionality[selectedInterfaceNum] == CY_TYPE_I2C){
if (pageAddress > 256){
printf ("Invalid Page address for I2C .. need to be less than 256\n");
continue;
}
if (readWriteLength > 64){
printf ("Invalid read write length for I2C .. need to be less than 64\n");
continue;
}
printf ("Calling I2C \n");
i2cVerifyData(glDevice[selectedDeviceNum].deviceNumber, selectedInterfaceNum);
}
if (glDevice[selectedDeviceNum].interfaceFunctionality[selectedInterfaceNum] == CY_TYPE_SPI){
spiVerifyData(glDevice[selectedDeviceNum].deviceNumber, selectedInterfaceNum);
}
break;
case 5:
exitApp = true;
CyLibraryExit ();
break;
}
}while (exitApp == false);
free (glDevice);
}
int spiWriteEnable (CY_HANDLE handle)
{
unsigned char wr_data,rd_data;
CY_RETURN_STATUS status = CY_SUCCESS;
CY_DATA_BUFFER writeBuf;
CY_DATA_BUFFER readBuf;
writeBuf.buffer = &wr_data;
writeBuf.length = 1;
readBuf.buffer = &rd_data;
readBuf.length = 1;
wr_data = 0x06; /* Write enable */
status = CySpiReadWrite (handle, &readBuf, &writeBuf, 5000);
if (status != CY_SUCCESS)
{
return status;
}
return status;
}
//Helper functions for doing data transfer to/from SPI flash
int spiWaitForIdle (CY_HANDLE handle)
{
char rd_data[2], wr_data[2];
CY_DATA_BUFFER writeBuf, readBuf;
writeBuf.length = 2;
writeBuf.buffer = (unsigned char *)wr_data;
int timeout = 0xFFFF;
CY_RETURN_STATUS status;
readBuf.length = 2;
readBuf.buffer = (unsigned char *)rd_data;
do
{
wr_data[0] = 0x05; /* Status */
status = CySpiReadWrite (handle, &readBuf, &writeBuf, 5000);
if (status != CY_SUCCESS)
{
break;
}
timeout--;
if (timeout == 0)
{
status = CY_ERROR_IO_TIMEOUT;
return status;
}
} while (rd_data[1] & 0x01);
return status;
}
int spiVerifyData (int deviceNumber, int interfaceNum)
{
CY_DATA_BUFFER dataBufferWrite,dataBufferRead;
CY_HANDLE handle;
bool isVerify = true;
unsigned char wbuffer[256 + 4], rbuffer[256 + 4];
int rStatus, length;
memset (rbuffer, 0x00, 256);
memset (wbuffer, 0x00, 256);
rStatus = CyOpen (deviceNumber, interfaceNum, &handle);
if (rStatus != CY_SUCCESS){
printf ("CY_SPI: Open failed \n");
return rStatus;
}
dataBufferWrite.buffer = wbuffer;
dataBufferRead.buffer = rbuffer;
rStatus = spiWaitForIdle (handle);
if (rStatus){
printf("Error in Waiting for EEPOM active state %d \n", rStatus);
CyClose (handle);
return CY_ERROR_REQUEST_FAILED;
}
printf ("Calling spi write enable \n");
rStatus = spiWriteEnable (handle);
if (rStatus){
printf("Error in setting Write Enable %d \n", rStatus);
CyClose (handle);
return CY_ERROR_REQUEST_FAILED;
}
//Write SPI write command
wbuffer[0] = 0x02;
//SPI flash address
wbuffer[1] = (pageAddress >> 8);
wbuffer[2] = (pageAddress) & 0x00FF;
wbuffer[3] = 0;
printf ("The Data written is ...\n");
printf ("\n--------------------------------------------------------------------\n");
for (rStatus = 4; rStatus < (readWriteLength + 4); rStatus++){
wbuffer[rStatus] = rand() % 256;
printf ("%x ",wbuffer[rStatus]);
}
printf ("\n--------------------------------------------------------------------\n");
dataBufferRead.length = (4 + readWriteLength);
dataBufferWrite.length = (4 + readWriteLength);
rStatus = CySpiReadWrite (handle , &dataBufferRead, &dataBufferWrite, 5000);
if (rStatus != CY_SUCCESS){
CyClose (handle);
printf ("Error in doing SPI data write data Write is %d data read is %d\n" , dataBufferWrite.transferCount,dataBufferRead.transferCount);
return CY_ERROR_REQUEST_FAILED;
}
spiWaitForIdle (handle);
//Write SPI read command
wbuffer[0] = 0x03;
dataBufferRead.length = (4 + readWriteLength);
dataBufferWrite.length = (4 + readWriteLength);
rStatus = CySpiReadWrite (handle, &dataBufferRead, &dataBufferWrite, 5000);
if (rStatus != CY_SUCCESS){
CyClose (handle);
printf ("The Error is %d \n", rStatus);
printf ("Error in doing SPI data write data Write is %d data read is %d\n" , dataBufferWrite.transferCount,dataBufferRead.transferCount);
return CY_ERROR_REQUEST_FAILED;
}
printf ("Data Read back is \n");
printf ("\n---------------------------------------------------------------------\n");
for (rStatus = 4; rStatus < (readWriteLength + 4); rStatus++){
printf ("%x ",rbuffer[rStatus]);
if (rbuffer[rStatus] != wbuffer[rStatus]){
isVerify = false;
}
}
printf ("\n---------------------------------------------------------------------\n");
if (isVerify)
printf ("Data verified successfully \n");
else
printf ("Data corruption occured!!\n");
CyClose (handle);
return CY_SUCCESS;
}
int i2cVerifyData (int deviceNumber, int interfaceNum)
{
CY_DATA_BUFFER dataBufferWrite, dataBufferRead;
CY_HANDLE handle;
int length = 0;
bool isVerify = true;
int loopCount = 100, i;
CY_RETURN_STATUS rStatus;
unsigned char bytesPending = 0, address[2], wbuffer[66], rbuffer[66];
CY_I2C_DATA_CONFIG i2cDataConfig;
memset (wbuffer, 0, 66);
memset (rbuffer, 0, 66);
i2cDataConfig.isStopBit = true;
i2cDataConfig.slaveAddress = 0x51;
rStatus = CyOpen (deviceNumber, interfaceNum, &handle);
if (rStatus != CY_SUCCESS){
printf("CY_I2C: Open failed \n");
return rStatus;
}
loopCount = 100;
length = readWriteLength;
wbuffer[0]= pageAddress;
wbuffer[1] = 0;
dataBufferWrite.buffer = wbuffer;
i2cDataConfig.isStopBit = true;
dataBufferWrite.length = (length + 2);
printf ("\n Data that is written on to i2c ...\n");
printf ("\n-----------------------------------------------------------------\n");
for (i = 2; i < (length +2); i++){
wbuffer[i] = rand() % 256;
printf ("%x ", wbuffer[i]);
}
printf ("\n-----------------------------------------------------------------\n");
rStatus = CyI2cWrite (handle, &i2cDataConfig, &dataBufferWrite, 5000);
if (rStatus != CY_SUCCESS){
printf ("Error in doing i2c write \n");
CyClose (handle);
return -1;
}
//We encountered a error in I2C read repeat the procedure again
//Loop here untill Read vendor command passes
i2cDataConfig.isStopBit = false;
dataBufferWrite.length = 2;
do {
rStatus = CyI2cWrite (handle, &i2cDataConfig, &dataBufferWrite, 5000);
loopCount--;
}while (rStatus != CY_SUCCESS && loopCount != 0);
if (loopCount == 0 && rStatus != CY_SUCCESS){
printf ("Error in sending read command \n");
CyClose (handle);
return -1;
}
dataBufferRead.buffer = rbuffer;
rbuffer[0]= address[0];
rbuffer[1] = 0;
i2cDataConfig.isStopBit = true;
i2cDataConfig.isNakBit = true;
dataBufferRead.length = length;
dataBufferRead.buffer = rbuffer;
memset (rbuffer, 0, 64);
rStatus = CyI2cRead (handle, &i2cDataConfig, &dataBufferRead, 5000);
if (rStatus != CY_SUCCESS){
printf ("Error in doing i2c read ... Error is %d \n", rStatus);
CyClose (handle);
return -1;
}
printf ("\n Data that is read from i2c ...\n");
printf ("\n-----------------------------------------------------------------\n");
for (rStatus = 0; rStatus < length; rStatus++){
printf ("%x ", rbuffer[rStatus]);
if (rbuffer[rStatus] != wbuffer[rStatus + 2]){
isVerify = false;
}
}
printf ("\n-----------------------------------------------------------------\n");
if (!isVerify)
printf ("Data corruption occured ..!!!\n");
else
printf ("Data verified successfully \n");
CyClose (handle);
}
bool isCypressDevice (int deviceNum) {
CY_HANDLE handle;
unsigned char interfaceNum = 0;
unsigned char sig[6];
CY_RETURN_STATUS rStatus;
rStatus = CyOpen (deviceNum, interfaceNum, &handle);
if (rStatus == CY_SUCCESS){
rStatus = CyGetSignature (handle, sig);
if (rStatus == CY_SUCCESS){
CyClose (handle);
return true;
}
else {
CyClose (handle);
return false;
}
}
else
return false;
}
void printListOfDevices (bool isPrint)
{
int index_i = 0, index_j = 0, i, j, countOfDevice = 0, devNum;
int length, index = 0, numInterfaces, interfaceNum;
bool set1 = false;
unsigned char deviceID[CY_MAX_DEVICES];
unsigned char functionality[64];
CY_DEVICE_INFO deviceInfo;
CY_DEVICE_CLASS deviceClass[CY_MAX_INTERFACES];
CY_DEVICE_TYPE deviceType[CY_MAX_INTERFACES];
CY_RETURN_STATUS rStatus;
deviceAddedRemoved = false;
CyGetListofDevices (&numDevices);
//printf ("The number of devices is %d \n", numDevices);
for (i = 0; i < numDevices; i++){
for (j = 0; j< CY_MAX_INTERFACES; j++)
glDevice[i].interfaceFunctionality[j] = -1;
}
if (isPrint){
printf ("\n\n---------------------------------------------------------------------------------\n");
printf ("Device Number | VID | PID | INTERFACE NUMBER | FUNCTIONALITY \n");
printf ("---------------------------------------------------------------------------------\n");
}
cyDevices = 0;
for (devNum = 0; devNum < numDevices; devNum++){
rStatus = CyGetDeviceInfo (devNum, &deviceInfo);
interfaceNum = 0;
if (!rStatus)
{
if (!isCypressDevice (devNum)){
continue;
}
strcpy (functionality, "NA");
numInterfaces = deviceInfo.numInterfaces;
glDevice[index].numInterface = numInterfaces;
cyDevices++;
while (numInterfaces){
if (deviceInfo.deviceClass[interfaceNum] == CY_CLASS_VENDOR)
{
glDevice[index].deviceNumber = devNum;
switch (deviceInfo.deviceType[interfaceNum]){
case CY_TYPE_I2C:
glDevice[index].interfaceFunctionality[interfaceNum] = CY_TYPE_I2C;
strcpy (functionality, "VENDOR_I2C");
glDevice[index].isI2c = true;
break;
case CY_TYPE_SPI:
glDevice[index].interfaceFunctionality[interfaceNum] = CY_TYPE_SPI;
strcpy (functionality, "VENDOR_SPI");
glDevice[index].isSpi = true;
break;
default:
strcpy (functionality, "NA");
break;
}
}
else if (deviceInfo.deviceClass[interfaceNum] == CY_CLASS_CDC){
strcpy (functionality, "NA");
}
if (isPrint) {
printf ("%d |%x |%x | %d | %s\n", \
index, \
deviceInfo.vidPid.vid, \
deviceInfo.vidPid.pid, \
interfaceNum, \
functionality \
);
}
interfaceNum++;
numInterfaces--;
}
index++;
}
}
if (isPrint){
printf ("---------------------------------------------------------------------------------\n\n");
}
}