kristjank/TeraHz
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Merge branch 'master' of https://github.com/cls-02/TeraHz

Browse Source
This commit is contained in:
Kristjan Komlosi
2019-06-26 01:30:27 +02:00
parent 0a856e69c7 fd1f07d40d
commit 191feb7077
2 changed files with 10 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
docs/electrical.md
View File

@@ -21,8 +21,13 @@ project when basic testing will be done.
GPIO can be routed to the PCB with a standard old IDE disk cable, and terminated GPIO can be routed to the PCB with a standard old IDE disk cable, and terminated
with another 40-pin connector at the PCB. Sensor breakouts should be mounted with another 40-pin connector at the PCB. Sensor breakouts should be mounted
<<<<<<< HEAD
through standard 0.1" connectors, male on the sensor breakout and female on the through standard 0.1" connectors, male on the sensor breakout and female on the
PCB. A shitty add-on header and a shitty add-on header v1.69bis can't hurt, either. PCB. A shitty add-on header and a shitty add-on header v1.69bis can't hurt, either.
=======
through standard 0.1" connectors, male on the sensor brakout and female on the
PCB. A shitty addon header and a shitty addon header v1.69bis can't hurt, either.
>>>>>>> fd1f07d40dace3e003e49377d4771de53f8bdeb8
## SMBus sensors ## SMBus sensors
SMBus is a well-defined version of the well-known I2C bus, widely used SMBus is a well-defined version of the well-known I2C bus, widely used
@@ -34,7 +39,11 @@ Pins are familiarly marked as SDA and SCL, the same as with classic I2C. They
connect to the SDA and SCL pins on the VEML6075 and APDS-9301 sensor. connect to the SDA and SCL pins on the VEML6075 and APDS-9301 sensor.
## UART sensor ## UART sensor
<<<<<<< HEAD
Spectral sensor attaches through the UART port on the Raspberry pi (see picture). Spectral sensor attaches through the UART port on the Raspberry pi (see picture).
=======
Spectrometry sensor attaches through the UART port on the Raspberry pi (see picture).
>>>>>>> fd1f07d40dace3e003e49377d4771de53f8bdeb8
The Tx and Rx lines must cross over, connecting the sensor's Tx line to the The Tx and Rx lines must cross over, connecting the sensor's Tx line to the
computer's Rx line and vice versa. computer's Rx line and vice versa.

2
mkdocs.yml
View File

@@ -2,7 +2,7 @@ site_name: TeraHz Documentation
theme: readthedocs theme: readthedocs
nav: nav:
- Start page: 'index.md' - Start page: 'index.md'
- Expert's guide: - Advanced guides:
- Build guide: 'build.md' - Build guide: 'build.md'
- Developer's guide: 'dev-guide.md' - Developer's guide: 'dev-guide.md'
- Electrical connections: 'electrical.md' - Electrical connections: 'electrical.md'